Ge
tting Star
te
d
11
GB
Check that you have the following items:
• Speakers (5)
• Subwoofer (1)
• Surround amplifier (1)
• Speaker cord cover (1)
• Speaker cord holder (1)
• Screw (1)
• IR transmitter* (1)
• IR receiver* (1)
• IR receiver stand (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (3.5m
×
3, 5m
×
2)
• Remote Commander (remote) RM-SP240 (1)
• Size AA (R6) batteries (2)
• Foot pads (4)
• Operating Instructions
• Speakers-connection and Installation (card)
(1)
* The cords of the IR transmitter and IR receiver are
for this system only. You cannot use a
commercially available extension cord.
You can control the system using the supplied
remote. Insert two size AA (R6) batteries by
matching the
3
and
#
ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor
on the system.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from
the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
Getting Started
Unpacking
Inserting Batteries into
the Remote