86
GB
x
[BLACK LEVEL (COMPONENT OUT)]
(Latin American models only)
You can select the black level (setup level) for
the video signals output from the
COMPONENT VIDEO OUT jacks.
You cannot select this and the setting is not
effective when the system outputs progressive
signal.
x
[PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
You can select the picture in pause mode.
x
[HDMI RESOLUTION]
You can select the type of video signal that is
output from the HDMI OUT jack. For details,
see “To select the type of video signal output
from the HDMI OUT jack” (page 29).
* i: interlace, p: progressive
** Depending on the country model, [720
×
480p] may
appear.
x
[CONTROL FOR HDMI]
You can set the [CONTROL FOR HDMI]
function to on/off. This function is available
when you connect the system and TV with an
HDMI cable. For details, see “Using the Control
for HDMI Function for “BRAVIA” Sync”
(page 63).
[OFF]
You can set the black level of the
output signal to the standard level.
[ON]
You can raise the standard black
level. Use this when the picture
becomes too black.
[AUTO]
The picture, including subjects
that move dynamically, is output
with no jitter.
[FRAME]
The picture, including subjects
that do not move dynamically, is
output in high resolution.
Settings for the HDMI
[HDMI SETUP]
[AUTO(1920×1080p)]
The system outputs the
optimal video signal for the
connected TV.
[1920×1080i]
The system outputs
1920
×
1080i* video signals.
[1280×720p]
The system outputs
1280
×
720p* video signals.
[720×480/576p]
The system outputs
720
×
480p* or 720
×
576p*
video signals.
[OFF]
Off.
[ON]
On. You can operate mutually
between components that are
connected with an HDMI cable.
HDMI SETUP
CONTROL FOR HDMI:
HDMI RESOLUTION:
VOLUME LIMIT:
AUTO
(1920x1080p)
OFF
LEVEL2
YC
B
C
R
OFF
SD
YC
B
C
R
/RGB(HDMI):
JPEG RESOLUTION:
AUDIO(HDMI):
