O
th
e
r O
p
era
tions
75
GB
Presetting radio stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1
Press FUNCTION repeatedly until the
band you want appears in the front
panel display.
2
Press and hold or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3
Press TUNER MENU.
4
Press
C
/
X
/
x
/
c
repeatedly until
“MEMORY” appears in the front panel
display.
5
Press ENTER.
A preset number appears in the front panel
display.
6
Press
X
/
x
to select the preset number
you want.
7
Press ENTER.
The station is stored.
8
Repeat 1 to 7 to store other stations.
To change the preset number
Restart from Step 1.
To change the AM tuning interval
(except for Middle Eastern
model)
The AM tuning interval can be set to either
10 kHz or 9 kHz.
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing
"
/
1
on the system. While holding down
>
(on the system), press
"
/
1
on the system to
turn on the power. If you change the interval,
AM preset stations will be erased.
To reset the interval, repeat the same procedure.
Listening to the radio
Preset radio stations in the system’s memory
first (see “Presetting radio stations” (page 75)).
1
Press FUNCTION repeatedly until “FM”
or “AM” appears in the front panel
display.
The last received station is tuned in.
2
Press or – repeatedly to
select the preset station you want.
Each time you press the button, the system
tunes in one preset station.
Enjoying the Radio
TUNER
MENU
CLEAR
TUNING –/+
C/X/x/c
ENTER
FUNCTION
PRESET
–/+
/–
continued
