Sony DAV-DZ20, Руководство по эксплуатации

Страница: 49 / 88

T
u
ner Fu
ncti
ons
49
GB
6
Create a name by using the cursor
buttons.
Press X / x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station.
If you make a mistake
Press
C
/
c
repeatedly until the character to
be changed flashes, then press
X
/
x
to select
the desired character.
To erase the character, press
C / c
repeatedly until the character to be erased
flashes, then press CLEAR.
7
Press .
“COMPLETE” appears in the front panel
display, and the station name is stored.
8
Press SYSTEM MENU.
The system menu turns off.
Tip
• You can check the frequency by pressing DISPLAY
repeatedly (page 49).
Viewing the station name or
frequency in the front panel
display
When the system is set to “TUNER FM” or
“TUNER AM,” you can check the frequency
using the front panel display.
Press DISPLAY.
Each time you press DISPLAY, the display
changes as shown.
1
Station name*
2
Frequency**
* This is displayed if you have entered a name for a
preset station.
** Returns to the original display when several seconds
has elapsed.
What is the Radio Data
System?
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display.
RDS is available only for FM stations.*
Note
• RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name* appears in the front
panel display.
* If an RDS broadcast is not received, the station
name may not appear in the front panel display.
Using the Radio Data
System (RDS)