manualshive.com logo in svg

Sony D50PH, Руководство по эксплуатации

Sony D50PH - ручка с инструкциями по эксплуатации. Скачайте бесплатно руководство по эксплуатации для вашего удобства с нашего веб-сайта. Идеальное решение для точного понимания функций и возможностей продукта. Повысьте эффективность использования Sony D50PH с помощью нашего руководства. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

3

For customers in the USA
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.  These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment.  This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.  Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.

You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.

The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with the
limits for a digital device pursuant to Subpart B of Part 15 of
FCC Rules.

For the customers in Europe (for DXC-D50PK/D50PL/
D50WSPL/D50PH)
This product with the CE marking complies with the EMC
Directive (89/336/EEC) issued by the Commission of the
European Community.
Compliance with this directive implies conformity to the
following European standards:
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environment(s):
E1 (residential), E2 (commercial and light industrial), E3
(urban outdoors) and E4 (controlled EMC environment, ex.
TV studio).

Pour les clients européens (pour les DXC-D50PK/D50PL/
D50WSPL/D50PH)
Ce produit portant la marque CE est conforme à la Directive
sur la compatibilité électromagnétique (EMC) (89/336/CEE)
émise par la Commission de la Communauté Européenne.
La conformité à cette directive implique la conformité aux
normes européennes suivantes:
• EN55103-1: Interférences électromagnétiques (émission)
• EN55103-2: Sensibilité électromagnétique (immunité)
Ce produit est prévu pour être utilisé dans les
environnements électromagnétiques suivants:
E1 (résidentiel), E2 (commercial et industrie légère),
E3 (urbain extérieur) et E4 (environnement EMC contrôlé, ex.
studio de télévision).

Für Kunden in Europa (für DXC-D50PK/D50PL/D50WSPL/
D50PH)
Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die
EMV-Richtlinie (89/336/EWG) der EG-Kommission.
Angewandter Normen:
• EN55103-1: Elektromagnetische Verträglichkeit
(Störaussendung)
• EN55103-2: Elektromagnetische Verträglichkeit
(Störfestigkeit),
für die folgenden elektromagnetischen Umgebungen:
E1 (Wohnbereich), E2 (kommerzieller und in beschränktem
Maße industrieller Bereich), E3 (Stadtbereich im Freien) und
E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).

For the customers in the USA and Canada

RECYCLING NICKEL-CADMIUM BATTERIES

Nickel Cadmium batteries are recyclable.
You can help preserve our environment by
returning your unwanted batteries to your
nearest point for collection, recycling or
proper disposal.
Note: In some areas the disposal of nickel

cadmium batteries in household or
business trash may be prohibited.

RBRC (Rechargeable Battery Recycling Corporation)
advises you about spent battery collection by the following
phone number.

Call toll free number: 1-800-822-8837 (United States and
Canada only)

Caution: Do not handle damaged or leaking nickel-cadmium

batteries.

For safety reasons, be sure to discharge the battery
before discarding it.

Pour les utilisateurs aux Etats-Unis et au Canada

RECYCLAGE DES BATTERIES AU NICKEL-CADMIUM

Les batteries au nickel-cadmium sont
recyclables. Vous pouvez contribuer à
préserver l’environnement en rapportant les
batteries usées dans un point de ramassage,
recyclage ou retraitement.
Remarque: Dans certain pays, il est interdit

de jeter les batteries au nickel-
cadmium avec les ordures
ménagères ou dans les
poubelles de bureau.

Questionnez chez RBRC (Rechargeable Battery Recycling
Corporation) pour les bateries usées.

Le numéro est: 1-800-822-8837 (Etats-Unis et Canada

uniquement)

Avertissement: Ne pas utiliser des batteries au nickel-

cadmium qui sont endommagées ou qui
fuient.

Par mesure de sécurité, déchargez bien la batterie avant
de la jeter.

Содержание D50PH



































































































Отзывы:

Нет отзывов

Похожие инструкции для D50PH

Panasonic AG-HVX202AEN Operating Instructions Manual preview
AG-HVX202AEN
Бренд: Panasonic Страницы: 136
Panasonic NV-GS5EG Service Manual preview
NV-GS5EG
Бренд: Panasonic Страницы: 260
Panasonic NV-GS180EG Service Manual preview
NV-GS180EG
Бренд: Panasonic Страницы: 62
Canon Canovision8 E50E Service Manual preview
Canovision8 E50E
Бренд: Canon Страницы: 179
BlackSys CAMMSYS CH-100B User Manual preview
CAMMSYS CH-100B
Бренд: BlackSys Страницы: 40
Trust 738AVl User Manual preview
738AVl
Бренд: Trust Страницы: 33
Lumens VC-B11U User Manual preview
VC-B11U
Бренд: Lumens Страницы: 12
Lumens VC-B30U Firmware Upgrade preview
VC-B30U
Бренд: Lumens Страницы: 12
Lumens VC-BC701P User Manual preview
VC-BC701P
Бренд: Lumens Страницы: 26
Lumens VC-BC301P User Manual preview
VC-BC301P
Бренд: Lumens Страницы: 33
Lumens VC-A61P User Manual preview
VC-A61P
Бренд: Lumens Страницы: 48
Lumens VC-A71P User Manual preview
VC-A71P
Бренд: Lumens Страницы: 54
Gembird ICAM-WRHD-01 User Manual preview
ICAM-WRHD-01
Бренд: Gembird Страницы: 107
Canon DC310 Brochure preview
DC310
Бренд: Canon Страницы: 24
Panasonic HC-MDH3 Owner'S Manual preview
HC-MDH3
Бренд: Panasonic Страницы: 160
Panasonic DVCPRO AJ-D615MC Parts List preview
DVCPRO AJ-D615MC
Бренд: Panasonic Страницы: 26
Panasonic HC-V787 Operating Instructions Manual preview
HC-V787
Бренд: Panasonic Страницы: 198
Panasonic AU45H - PORTABLE MII DECK Operating Instructions Manual preview
AU45H - PORTABLE MII DECK
Бренд: Panasonic Страницы: 72

Бренды по названию

Популярные бренды

Загрузить еще бренды