Sony Cyber-shot PRO DSC-D700, Руководство по обслуживанию

Страница: 36 / 116

1-30
DSC-D700 (UC,CE)
58 GB
Ad
v
anced Operations Settings
3
Auto (Auto White Balance)
This is the default. White balance is
automatically adjusted to give a natural color tone
according to the amount of light when shooting.
Hold (White Balance Hold)
Choose this when you want better color
reproduction or you are shooting a monochrome
subject and background. Press the WB button to
adjust the white balance. For further information
refer to the Adjusting the White Balance Hold
section below.
Outdoor (Outdoor)
White balance is automatically adjusted to attain
natural colors when shooting outdoors.
Indoor (Indoor)
White balance is automatically adjusted to attain
natural colors when shooting indoors.
Note
White balance modes are indicated as ATW
(Auto), WB/HOLD (Hold), [
] (Outdoor), and
[ ] (Indoor] on the LCD panel.
5
Release the shift button.
After the white balance mode is set, exit the
menu. The camera is ready to take pictures.
Adjusting White Balance with White Balance Hold
WB
1
Choose WHITE BALANCE HOLD as the white
balance mode.
2
Point the camera at a completely white subject
until it fills the viewfinder.
3
Push the WB button.
WB is indicated in the viewfinder and the white
balance adjustment begins.
59 GB continued on next page
Ad
v
anced Operations Settings
When the WB indicator disappears, white balance
adjustment is complete.
The camera is ready to take pictures.
The white balance you have chosen is valid until
you readjust it.
Note
When the WB indicator flashes, the white
level was not successfully adjusted.
Press any other operation button to leave
this mode, then begin the white balance
adjustment process again.
Changing the ISO Sensitivity
You can the get the same effect with this mode as is achieved by using films with different ISO
sensitivities in film cameras. You can choose from ISO 100, 200 and 400.
ISO
USER
SIZE
QUAL DRIVE
WB
SIZE
•CAM
•PLAY
•OFF
ISO USER SIZE
QUAL
DRIVE
WB
AE
1
While pressing the mode lock (green), turn the
power/mode dial to CAM mode.
2
Push the LCD button to turn on the LCD monitor.
Note
Settings can also be confirmed on the LCD panel.
When checking the settings on the LCD panel,
this step is not necessary.
3
Turn the mode dial to ISO and then press the shift
button.
The ISO MODE menu appears.
1
2
3
4
3~5