91
DSC-W30/W40/W50
2-667-836-
13
(1)
D:\WORK\DSC-W30_40_50\2667836111_UGGB\01GB-DSCW30\100TS.fm
master:Right
Tr
oub
lesh
oo
ti
n
g
Your camera does not work.
•
Use the type of battery pack you can use with this camera.
•
The battery level is low (The
E
indicator appears). Charge the battery pack (
t
step 1 in
“Read This First”
).
The power is on, but the camera does not work.
•
The built-in microcomputer is not working properly. Remove the battery pack, and then, after
one minute, insert the battery pack and turn on the camera.
Cannot identify an indicator on the screen.
•
See page 19.
The lens gets fogged.
•
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it (page 99).
The camera becomes warm when you use it for a long time.
•
This is not a malfunction.
The lens does not move when you turn off the camera.
•
The battery pack is discharged. Replace it with a charged battery pack (
t
Step 1 in “Read
This First”
) or use the AC Adaptor (not supplied).
The Clock Set screen appears when you turn on the camera.
•
Set the date and time again (
t
step 2 in
“Read This First”
).
Others