32
Viewing images on a TV screen
,
Connect the supplied A/V
connecting cable to the A/V
OUT (MONO) jack of the
camera and the audio/video
input jacks of the TV.
If your TV has stereo input jacks, connect
the audio plug (black) of the A/V
connecting cable to the left audio jack.
•
Turn off both your camera and the TV before
connecting the camera and the TV with the A/V
connecting cable.
•
We recommend using the AC Adaptor
(supplied) to prevent the power from turning off
partway.
,
Turn on the TV and set the TV/
Video switch to “Video”.
•
The name and location of this switch may differ
depending on your TV. For details, see the
operating instructions supplied with the TV.
,
Set the mode dial to
, and
turn on the camera.
Press
b
/
B
on the control button to select the
desired image.
•
When using your camera abroad, it may be
necessary to switch the video output signal to
match that of your TV system (page 117).
1
A/V OUT
(MONO) jack
A/V
connecting
cable
(supplied)
2
TV/Video switch
3
BACK/NEXT
10:30
PM
2003 7 4
101-0002
VGA
VOLUME
2/9
101
60
min
Содержание CYBER-SHOT DSC-V1
Страница 131: ......