74
Warnings and messages
The following messages appear on the LCD screen.
Message
Meaning/Corrective Action
NO MEMORY STICK
• Insert a “Memory Stick Duo” (page 17).
SYSTEM ERROR
• Turn the power off and on again (page 14).
MEMORY STICK ERROR
• The inserted “Memory Stick Duo” cannot be used in your camera (page 82).
• The “Memory Stick Duo” is damaged, or the terminal section of the “Memory Stick Duo” is dirty.
• Insert the “Memory Stick Duo” correctly (page 17).
MEMORY STICK TYPE ERROR
• The inserted “Memory Stick Duo” cannot be used in your camera (page 82).
FORMAT ERROR
• The “Memory Stick Duo” format failed. Format the “Memory Stick Duo” again (page 51).
MEMORY STICK LOCKED
• You are using a “Memory Stick Duo” with a write-protect switch, and the switch is set to LOCK. Set it to the
recording position (page 82).
NO MEMORY SPACE
• The capacity of the “Memory Stick Duo” is insufficient. You cannot record images. Delete unnecessary images
(page 50).
READ ONLY MEMORY
• You cannot record or delete an image saved on this type of “Memory Stick Duo” using your camera.
NO FILE IN THIS FOLDER
• No images have been recorded in this folder.
FOLDER ERROR
• A folder with the same first three digits number already exists in the “Memory Stick Duo.” (For example:
123MSDCF and 123ABCDE) Select other folders, or create a new folder.
CANNOT CREATE MORE
FOLDERS
• The folder whose first three digits of the name is “999” exists in the “Memory Stick Duo.” You cannot create
any folders.
CANNOT RECORD
• The camera cannot record images in the selected folder. Select a different folder (page 26).
FILE ERROR
• An error occurred while playing back the image.
FILE PROTECT
• The image is write-protected by another device. Release the protection by another device.
IMAGE SIZE OVER
• You are attempting to play back an image of a size that cannot be played back on your camera.
• You are using the PictBridge function to print an image shot with another camera.
INVALID OPERATION
• You are attempting to assign the print (DPOF) mark to a file that was created by another device.
• The battery level is low or zero. Charge the batteries (page 10). Depending on the conditions of use, the indicator
may flash even though there are still 5 to 10 minutes of remaining battery time left.