Sony Cyber-shot DSC-S85, Руководство по обслуживанию

Страница: 21 / 25

– 21 –
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2
Perform “Data setting during
camera system adjustments”.
(Refer to page 5-14)
3 6 90 00
4 6 91 00
5 6 92 FF
6 6 93 FF
7 6 2C 01
8 6 01 79 Press PAUSE button.
9 6 07 Check the data changes to “01”.
10 6 01 67 Press PAUSE button.
11
Check the flashing of strobe
light.
12 6 02 Check the data changes to “01”.
13 6 01 00 Press PAUSE button.
14 6 01 67 Press PAUSE button.
15
Check the flashing of strobe
light.
16 6 02 Check the data changes to “01”.
17 6 01 00 Press PAUSE button.
18 7 03 05 Press PAUSE button.
19 6 01 B9 Press PAUSE button. (Note 7)
20
Check the flashing of strobe
light.
21 6 02 Check the data changes to “01”.
22 6 01 00 Press PAUSE button.
23 7 03 04 Press PAUSE button.
24 6 01 67 Press PAUSE button.
25
Check the flashing of strobe
light.
26 6 02 Check the data changes to “01”.
27 F 64
Check that the data satisfies
the Y level data satisfied
value. (Note 4)
28 0 03 02
29 1
Check the R-Y and B-Y level
data (Note 5) satisfies the
specified value.
Note 7:
The adjustment data will be automatically input to
page: F, address: 4D, 4E, 64 and 69 to 6B.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 0 03 00
2 6 01 00 Press PAUSE button.
3 6 2C 00
4 6 92 00
5 6 93 00
6
Release the data setting
performed at step 2 .
(Refer to page 5-14)
7 0 01 00
17. Strobe White Balance Adjustment
Adjust the white balance when the strobe light flashed.
Mode CAMERA
Subject Flash adjustment box (Note 3)
(1.0 m from the front of the lens)
Adjustment Page F
Adjustment Address 4D, 4E, 64, 69 to 6B
Specified Value Y level data: 60 to 94 (Note 4)
R-Y level data: FA to FF or 00 to 06
(Note 5)
B-Y level data: FA to FF or 00 to 06
(Note 5)
Note 1: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2:
Perform this adjustment in the Flash adjustment box.
Note 3: Refer to “4. Preparing the Flash adjustment box”. (See
page 5-7)
Note 4: Displayed data of page: F, address: 64, of the adjusting
remote commander.
F:XX:64
Y level data
Note 5: The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
B-Y level data
R-Y level data
Note 6:
“Strobe White Balance Adjustment” is available only
once after the power is turned on. Turn the power off,
then on again if the adjustment is retried.
Switch setting:
1) FLASH ........................ ON