71
U
si
ng the
S
e
tu
p s
cr
een
Using the Setup screen
Camera 1
1
The default settings are marked with
.
Selects the auto focus operation mode.
Enlarges the images using digital processing. The camera uses either smart or precision digital
zoom.
• The maximum zoom scale of smart zoom/precision zoom includes the scale of the optical zoom.
• The AF range finder frame does not appear when using the digital zoom. The
,
or
indicator
flashes, and AF operates with priority on subjects located near the center of the frame.
To do digital zooming
Press
(Digital zoom). To cancel the digital zoom, press
again. The zoom scaling
returns to the number that was in effect using the optical zoom.
AF Mode
Single (S AF)
For details, see page 47.
Monitor (M AF)
Continuous (C AF)
Digital Zoom
Smart
(Smart zoom)
(
)
Enlarges the image digitally with almost no distortion. This is
not available when the image size is set to [10M].
• The maximum zoom scale of Smart zoom is shown in the
following table.
Precision
(Precision digital zoom)
(
)
Enlarges all image sizes up to a maximum of 10×, but the
image quality deteriorates.
button
For details on the operation
t
page 32