This setting shoots three images continuously with an exposure value shifted by plus or
minus 0.7 EV.
Cont. Bracket: 1.0EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or
minus 1.0 EV.
Cont. Bracket: 2.0EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or
minus 2.0 EV.
Cont. Bracket: 3.0EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or
minus 3.0 EV.
Note
The last shot is shown on the Auto Review.
When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by
adjusting the ISO value. If a setting other than [ISO AUTO] is selected, the exposure is
changed by adjusting the shutter speed.
When you adjust the exposure, the exposure is shifted based on the compensated value.
Bracket shooting is unavailable in the following situations:
The shooting mode is set to [Intelligent Auto], [Superior Auto], [Scene Selection], or [iSweep
Panorama].
When the flash is used, the product performs flash bracket shooting, which shifts the
amount of flash light even if [Cont. Bracket] is selected. Press the shutter button for each
image.
[77] How to Use
Using shooting functions
Selecting a drive mode (Continuous
shooting/Self-timer)
Single Bracket
Shoots multiple images while automatically shifting the exposure from base to darker and
then to lighter. Press the shutter button for each image. You can select an image that suits
your purpose after recording.
1. MENU
→
(Camera Settings
) →
[Drive Mode]
→
[Single Bracket].
2. Select the desired mode using the right/left side of the control wheel.