Ta
ble
of
Op
e
MENU/Settin
In
149
GB
Printing images directly using a
PictBridge compliant printer
Even if you do not have a computer, you can print images shot using the camera by connecting
the camera directly to a PictBridge compliant printer.
“PictBridge” is based on the CIPA standard. (CIPA: Camera & Imaging
Products Association)
• You cannot print movies.
• You cannot print panoramic images depending on the printer.
Prepare the camera for USB connection to the printer, using the cable for multi-use terminal.
1
Insert the sufficiently charged battery pack into the camera
2
Connect the camera to the printer
3
Turn on the printer
After the connection is made, the
indicator appears on the screen.
If the
indicator flashes on the screen of the camera (error
notification), check the connected printer.
• If it was impossible to connect to the printer, be sure to set [USB Connect] under
(Main Settings) to
[PictBridge].
Notes
Preparing the camera
Note
1
To the USB jack
2
To the multi
connector
Cable for multi-use terminal
indicator