18
CX-JT9
SECTION 4
TEST MODE
[COLD RESET]
•
The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press three keys of
x
,
[ENTER]
and
[POWER]
simultaneously.
3. The message “RESET” is displayed on the fluorescent indicator
tube momentarily, then becomes standby states.
[TUNER STEP CHANGE-OVER]
• A step of AM channels can be changed over between 9 kHz and
10 kHz.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press the
[TUNER BAND]
key to select “AM”.
3. Press the
[POWER]
key to turn the power OFF.
4. Press two keys of
[ENTER]
and
[POWER]
simultaneously.
5. The message “9K STEP” or “10K STEP” is displayed on the
fluorescent indicator tube, and thus the channel step is changed
over.
[CD SHIP MODE]
•
This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press the
[CD]
key to select “CD”.
3. Press two keys of
[CD]
and
[POWER]
simultaneously.
4. The message “LOCK” is displayed on the fluorescent indicator
tube, and the CD ship mode is set.
[CHANGE-OVER FUNCTION OF MD/VIDEO]
•
This mode is used to enable function of external input to change
over between MD and VIDEO.
Procedure:
1.
Set to standby state.
2.
Press two keys of
[MD VIDEO ]
and
[POWER]
simultaneously.
3.
The message “MD” or “VIDEO”is displayed on the
fluorescent indicator tube, and the function of external input
is changed over.
[CD TRAY LOCK MODE]
•
This mode is used to unable to take sample disc out of tray in
the shop.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press the
[CD]
key to select “CD”.
3. While pressing the
x
key, press the
Z
key for 5 seconds.
4. The message “LOCKED” is displayed on the fluorescent
indicator tube and the tray is locked. (Even if pressing
the
Z
key, the message “LOCKED” is displayed on the
fluorescent indicator tube and the tray is locked)
5. To release from this mode, while pressing the
x
key, press
the
Z
key for 5 seconds.
6. The message “UNLOCKED” is displayed on the fluorescent
indicator tube and the tray is unlocked.
[AMP TEST MODE]
•
This mode is used to set the parameter of AMP IC and EQ band
level and i-bass IC.
Procedure:
1. Press the
[POWER]
key to turn the power ON.
2. Press three keys of
x
,
[HIP HOP]
and
[HEAVY]
simultaneously.
3. When the AMP test mode is activated, the message “AMP
TEST” is displayed on the fluorescent indicator tube
momentarily.
4. Press two keys of
[HEAVY]
and
[DISC DIRECT PLAY 2]
simultaneously, mode is changed over to parameter setting
of AMP IC and EQ band level and i-bass IC.
5. In the AMP IC setting mode, press the
[ENTER]
key, surround
ON/OFF is changed over.
6. In the EQ band level setting mode, press the
[MANUAL]
key,
EQ band is changed over to LOW, MID or HIGH.
7. In the i-bass IC setting mode, turn the
[BASS]
knob, up/down
i-bass level, press the
[i-BASS]
key, i-bass f
0
level is change
over between 1 to 3.
8. To release from this mode, press two keys of
[HEAVY]
and
[TECHNO]
simultaneously.
)
(
All manuals and user guides at all-guides.com