7
CX-JN1
SECTION 2
GENERAL
This section is extracted from
instruction manual.
En
1
DISC CHANGE
Rotates the CD trays.
2
POWER
6
STANDBY/ON
Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.
3
MODE
Selects various modes (ECO and Repeat/Shuffle/
Programmed playback, etc.) when used in combination
with ENTER and MULTI JOG.
4
ENTER
Fixes the modes and the time (ECO, Repeat/Shuffle/
Programmed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.
!
Remote sensor
Receives a signal from the remote.
@
VOLUME
Adjusts the volume.
#
TREBLE
Enhances high frequency sound.
$
BASS
Emphasizes low frequency sound.
%
i-Bass
Produces rich and clear low frequency sound.
^
PTY (AEP, UK)
Displays a program type for RDS (Radio Data System)
RT (AEP, UK)
Displays text information for RDS (Radio Data System)
&
c
PLAY/PRESET
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
s
STOP/CLEAR
CD and Tape: stops playback.
Tuner: clears a station preset.
f
TUNING DOWN,
g
TUNING UP
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
PAUSE/SET
CD and Tape: pauses playback.
Tuner: stores the received station in to preset.
Main unit: front
5
MULTI JOG
When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programmed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
i-Bass: selects a frequency range.
Spectrum analyzer, ECO and Dimmer: selects the mode.
6
PHONES jack
Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.
7
SYNC DUB
Starts dubbing a whole tape.
w
REC/REC MUTING
Starts recording.
8
DISC DIRECT PLAY 1-3
Selects a disc.
9
z
OPEN/CLOSE
Opens or closes the disc compartment.
0
TAPE A/B
Selects Tape function, and deck A or B.
TUNER/BAND
Selects Tuner function and the radio band.
VIDEO/AUX
Selects the function of external equipment connected to
VIDEO/AUX jacks.
CD
Selects CD function.
*
MIC MIXING (Except AEP, UK, CIS)
Adjusts the microphone volume.
MIC jack (Except AEP, UK, CIS)
Connects the microphone here.
Main unit: rear
1
AM LOOP, FM 75
Ω
terminals
Plug in the supplied AM and FM antennas here.
2
VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.
Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "
VIDEO
",
"
AUX
" or "
TV
".
3
#
SPEAKER terminals
Connect the speaker cord of the supplied front speakers
here.
4
AC voltage selector (E, Chilean, Peruvian, Saudi Arabia, Singapore, Taiwan)
Switches AC voltage between 110 - 120V and 220 - 240V.
Make sure it matches your local voltage.
5
AC power cord
• LOCATION OF CONTROLS
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299