![Sony CX-BK2 Скачать руководство пользователя страница 27](http://html.mh-extra.com/html/sony/cx-bk2/cx-bk2_service-manual_416302027.webp)
25
CX-BK2
Checking Location: BD board (Side B)
Adjustment after CD Base Unit (BU-30CBD64NS) is Re-
placed
Perform the “E-F Balance (1 track jump) check”.
+
–
BD board
TP (TE)
TP (VC)
oscilloscope
Traverse Waveform
0V
B
level: 1.0
±
0.5 Vp-p
Center of
the waveform
A (DC
voltage)
Traverse Waveform
0V
Tracking servo
Sled servo
ON
A (DC
voltage)
Tracking servo
Sled servo
OFF
6.
Press the button. (The tracking servo and sledding servo
are turned ON)
Confirm A (DC voltage) at that tome is 0 V.
7. To exit from this mode, turn the power off.
Notes:
• Always move the optical pick-up to most inside track when
exiting from this mode. Otherwise, a disc will not be unloaded.
• Do not run the sled motor excessively, otherwise the gear can
be chipped.
E-F Balance Adjustment
Connection:
Procedure:
1.
Connect an oscilloscpe to test point TP (TE) and TP (VC) on
the BD board.
2.
AC is put in pushing
B
button to enter the CD test mode.
3.
Put the disc (YEDS-18) in to playback the number five track.
4.
Press the button. If it plays, press the button again.
B
(The tracking servo and the sledding servo are turned OFF)
5.
Rotate RV101 on the BD board to adjust A (DC voltage) of
the center of the oscilloscope waveform becomes 0 V.
Checking Location:
– BD BOARD (Side B) –
B
B
IC101
TP7
(VC)
IC103
RV101
E-F Balance
Adjustment
TP8
(RFAC)
TP6
(RFDC)
TP4
(FE)
TP2
(TE)
Содержание CX-BK2
Страница 28: ...26 CX BK2 MEMO ...
Страница 103: ...3 SX BK2 MEMO ...