Sony CPD-520GS - 21" CRT Display Скачать руководство пользователя

Страница: 6 / 55

SECTION 1

GENERAL

The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.

1-1

Getting Started

Warning on power connection

• Use an appropriate power cord for your local power

supply.

For the customers in the U.S.A.

If you do not use the appropriate cord, this monitor will
not conform to mandatory FCC standards.

Examples of plug types

• Before disconnecting the power cord, wait at least 30

seconds after turning off the power to allow the static
electricity on the CRT display surface to discharge.

• After the power has been turned on, the CRT is

demagnetized (degaussed) for about 3 seconds. This
generates a strong magnetic field around the metal frame,
which may affect the data stored on magnetic tapes and
disks near the bezel. Place magnetic recording equipment,
tapes and disks away from this monitor.

The outlet should be installed near the equipment
and be easily accessible.

Precautions

Installation

• Prevent internal heat build-up by allowing adequate air

circulation. Do not place the monitor on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.

• Do not install the monitor near heat sources such as

radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.

• Do not place the monitor near equipment which generates

magnetism, such as a transformer or high voltage power
lines.

Maintenance

• Clean the cabinet, panel and controls with a soft cloth

lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent,
such as alcohol or benzine.

• Do not rub, touch, or tap the surface of the screen with

sharp or abrasive items such as a ballpoint pen or
screwdriver. This type of contact may result in a scratched
picture tube.

• Clean the screen with a soft cloth. If you use a glass

cleaning liquid, do not use any type of cleaner containing
an anti-static solution or similar additive as this may
scratch the screen’s coating.

Transportation

When you transport this monitor for repair or shipment, use
the original carton and packing materials.

Use of the Tilt-Swivel

With the tilt-swivel, this monitor can be adjusted to the
desired angle within 180° horizontally and 20° vertically.
To turn the monitor vertically and horizontally, hold it at
the bottom with both hands as illustrated below.

for 100 to 120 V AC

for 200 to 240 V AC

Getting Started

Identifying Parts and Controls

See the pages in parentheses for further details.

Front

RESET (reset) button (page 17)

Resets the adjustments to the factory settings.

ASC (auto sizing and centering) button
(page 7)

Automatically adjusts the size and centering of the
images.

INPUT (input) button and HD15/BNC
indicators (page 8)

Selects the HD15 or 5BNC video input signal. Each time
you press this button, the input signal and
corresponding indicator alternate.

MENU (menu) button (pages 8 -17, 19)

Displays the MENU OSD.

(contrast) (

) buttons (pages 8 – 17,

22)

Adjust the contrast.

Function as the (

) buttons when adjusting other

items.

(brightness) (

) buttons (pages 8 –

17)

Adjust the picture brightness.

Function as the (

) buttons when adjusting other

items.

(power) switch and indicator (pages 19,

22)

Turns the monitor on or off.
The indicator lights up in green when the monitor is
turned on, and either flashes in green and orange or
lights up in orange when the monitor is in power
saving mode.

Pin No.