![background image](http://html.mh-extra.com/html/sony/cmt-ws2d/cmt-ws2d_operating-instructions-manual_420472010.webp)
10
GB
6
(Asian and Middle Eastern models only)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
The color system is factory set to NTSC for
region code 3 models, and PAL for other
region code models. Each time you perform
the procedure below, the color system
changes as follows:
NTSC
y
PAL
1
Press
?/1
to turn off the system.
2
Press
?/1
on the unit while holding
down
X
on the unit.
The system turns on and the color
system is changed.
Note
When you play back a VIDEO CD recorded in a
different color system from the one you set to the unit,
the picture image may be distorted.
To connect optional components
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
e
E
e
E
When carrying this system
Perform the following procedure to protect
the DVD mechanism.
Use buttons on the unit for the operation.
1
Press
?/1
to turn on the system, then
press DVD.
2
Make sure that no disc is loaded in the
system and check that “No Disc”
appears.
3
Press
?/1
to turn off the system and
check that “STANDBY” disappears.
4
Unplug the power cord.