background image

CMT-V50iP (GB)  4-418-711-

13

 (1)

WARNING

To reduce the risk of fire or electric shock, 

do not expose this apparatus to rain or 

moisture.

To reduce the risk of fire or electric shock, do not expose 

this apparatus to dripping or splashing, and do not place 

objects filled with liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a 

bookcase or built-in cabinet.
As the main plug is used to disconnect the unit from the 

mains, connect the unit to an easily accessible AC outlet. 

Should you notice an abnormality in the unit, disconnect 

the main plug from the AC outlet immediately.
Do not expose batteries or apparatus with battery-

installed to excessive heat such as sunshine, fire or the 

like.
The unit is not disconnected from the mains as long as 

it is connected to the AC outlet, even if the unit itself has 

been turned off.
The nameplate is located on the bottom exterior of the 

unit.
Excessive sound pressure from earphones and 

headphones can cause hearing loss.

CAUTION

The use of optical instruments with this product will 

increase eye hazard.

This appliance is classified 

as a CLASS 1 LASER 

product. This marking 

is located on the bottom 

exterior of the unit.

To reduce the risk of fire, do not cover the ventilation 

opening of the apparatus with newspapers, tablecloths, 

curtains, etc.

Do not place the naked flame sources such as lighted 

candles on the apparatus.

Notice for the customers in the U.S.A.

The dating code and the nameplate are located on the 

bottom exterior of the unit.

Owner’s Record

The model and serial numbers are located on the bottom 

exterior of the unit. Record these numbers in the space 

provided below. Refer to them whenever you call upon 

your Sony dealer regarding this product.
Model No.                                        

Serial No.                                         

Important Safety Instructions

1)  Read these instructions.

2)  Keep these instructions.

3)  Heed all warnings.

4)  Follow all instructions.

5)  Do not use this apparatus near water.

6)  Clean only with dry cloth.

7)  Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8)  Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

9)  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 

with one wider than the other. A grounding type 

plug has two blades and a third grounding prong. 

The wide blade or the third prong are provided for 

your safety. If the provided plug does not fit into your 

outlet, consult an electrician for replacement of the 

obsolete outlet.

10) Protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the 

manufacturer.

12) Use only with the cart, stand, tripod, 

bracket, or table specified by the 

manufacturer, or sold with the apparatus. 

When a cart is used, use caution when 

moving the cart/apparatus combination to 

avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or 

when unused for long periods of time.

14) Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 

damaged in any way, such as power-supply cord or 

plug is damaged, liquid has been spilled or objects 

have fallen into the apparatus, the apparatus has 

been exposed to rain or moisture, does not operate 

normally, or has been dropped.

The following FCC statement applies only 

to the version of this model manufactured 

for sale in the U.S.A. Other versions may 

not comply with FCC technical regulations.
NOTE:

This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant 

to Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful 

interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that 

interference will not occur in a particular installation.

If this equipment does cause harmful interference to 

radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged 

to try to correct the interference by one or more of the 

following measures:

  Reorient or relocate the receiving antenna.

  Increase the separation between the equipment and 

receiver.

  Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

  Consult the dealer or an experienced radio/TV 

technician for help.

CAUTION

You are cautioned that any changes or modifications 

not expressly approved in this manual could void your 

authority to operate this equipment.

For customers in Europe and Australia

  Disposal of Old Electrical & 

Electronic Equipment  

(Applicable in the European 

Union and other European 

countries with separate 

collection systems)

Note on DualDiscs

A DualDisc is a two sided disc product which mates 

DVD recorded material on one side with digital 

audio material on the other side. However, since the 

audio material side does not conform to the Compact 

Disc (CD) standard, playback on this product is not 

guaranteed.

Music discs encoded with copyright 

protection technologies

This product is designed to playback discs that conform 

to the Compact Disc (CD) standard. Recently, various 

music discs encoded with copyright protection 

technologies are marketed by some record companies. 

Please be aware that among those discs, there are some 

that do not conform to the CD standard and may not be 

playable by this product.

License and Trademark Notice

iPhone®, iPod®, iPod classic®, iPod nano®, and iPod 

touch® are trademarks of Apple Inc., registered in the 

U.S. and other countries. iPad® is a trademark of Apple 

Inc.

MPEG Layer-3 audio coding technology and patents 

licensed from Fraunhofer IIS and Thomson.

Windows Media is either a registered trademark or 

trademark of Microsoft Corporation in the United 

States and/or other countries.

This product is protected by certain intellectual 

property rights of Microsoft Corporation. Use or 

distribution of such technology outside of this product 

is prohibited without a license from Microsoft or an 

authorized Microsoft subsidiary.

All other trademarks and registered trademarks are of 

their respective holders. In this manual, 

 and 

®

 marks 

are not specified.

Getting Started

Location of Controls

Attaching a protective cushion

Attach the supplied protective cushion to avoid contact of 

an iPod/iPhone/iPad with the front panel of the system. 

You can protect against scratching the front panel 

and your iPod/iPhone/iPad by attaching the supplied 

protective cushion.

Protective cushion

Adjust the attaching position of the protective cushion to 

suit to your iPod/iPhone/iPad.

Setting the clock

Press 



 

 to turn on the system.

Press and hold SHIFT 

 and TIMER MENU 

 to 

select the clock set mode.

If “PLAY SET” flashes, press 

/

 

 repeatedly to 

select “CLOCK,” and then press   (enter) 

.

Press 

/

 

 repeatedly to set the hour, then press 

 (enter) 

.

Use the same procedure to set the minutes.

Note

The clock settings are reset when you disconnect the power cord or if 

a power failure occurs.

To display the clock when the system is off

Press DISPLAY 

. The clock is displayed for about 

8 seconds.

Operations

Playing a CD/MP3 disc

Select the CD function.

Press CD FUNCTION 

 on the remote or press 

FUNCTION 

 on the unit repeatedly.

The function indicator lights in yellow.

Insert a disc.

Insert a disc in the disc slot with the label side facing 

forward.

Insert a disc with 

the label side facing 

forward.

 Eject a disc

Playback starts automatically after “READING” 

disappear.
When you changing from another function to the CD 

function while a disc is already inserted in the disc 

slot, press 

 

 on the remote or press 

 

 on 

the unit to start playback.

Notes

When you turn on the system, the disc will not be pulled into the 

disc slot until “NO DISC” appears in the display. Do not attempt to 

push in the disc until “NO DISC” appears.

If you cannot insert the disc into the disc slot even when “NO DISC” 

appears in the display, there may already be a disc in the slot. Press 

and hold down 

 

 to eject such a disc forcibly. If even the system 

does not then eject the disc, contact your nearest Sony dealer.

If you cannot eject the disc and “LOCKED” appears in the display, 

contact your nearest Sony dealer.

Do not insert a disc with non-standard shapes (e.g., heart, square, 

star). The disc may fall into the system and cause irreparable 

damage.

When pressing 

 

 on the unit and then reinserting the disc that 

appears in the disc slot, do not simply push in the disc. Remove the 

disc from the disc slot and then reinsert it.

Do not turn off the system with a disc halfway inserted in the disc 

slot. Doing so may cause the disc to fall.

Do not use a disc with tape, seals or paste on it as this may cause 

malfunction.

When you eject a disc, handle the disc by its edge. Do not touch the 

surface.

Do not insert an 8 cm disc with an adapter. Doing so may cause the 

system to malfunction.

Other operations

To

Press

Pause playback

 

(or 

 

 on the unit). To 

resume play, press the button again.

Stop playback

 

.

Select a folder on 

an MP3 disc

 +/

 

.

Select a track or 

file

/

 

.

Find a point in a 

track or file 

Hold down 

/

 

 (or 

/

 

 on the unit) during 

playback, and release the button at 

the desired point.

Select Repeat Play REPEAT 

 repeatedly until “ ” or 

“ 1” appears.

Eject a disc

 

 on the unit.

To change the play mode

Press PLAY MODE 

 repeatedly while the player is 

stopped. You can select Normal Play mode (“FLDR” 

for all MP3 files in the folder on the disc), Shuffle Play 

mode (“SHUF” or “FLDR SHUF*” for folder shuffle), or 

Program Play mode (“PGM”).

* When playing a CD-DA (audio) disc, FLDR or FLDR SHUF Play 

performs the same operation as Normal or SHUF Play.

Notes on Repeat Play

” indicates that all tracks or files will be repeated until you stop 

playback.

1” indicates that a single track or file will be repeated until you 

stop playback.

Notes on Shuffle Play mode

When Shuffle Play mode is set to “SHUF,” the system shuffle-plays 

all tracks or files on the disc. When Shuffle Play mode is set to 

“FLDR SHUF,” the system shuffle-plays all tracks or files in selected 

folder. 

When you turn off the system, the selected Shuffle Play mode 

(“SHUF” or “FLDR SHUF”) is cleared and the play mode returns to 

Normal or FLDR Play mode.

Notes on playing MP3 discs

Do not save other types of tracks or files, or unnecessary folders on a 

disc that has MP3 files.

Folders that have no MP3 files are skipped.

The system can only play MP3 files that have a file extension of 

“.mp3.”

Even when file name has the “.mp3” file extension, if the actual 

file differs, playing this file may generate a loud noise which could 

damage the system may malfunction.

The maximum number of:

 999* folders (including the root folder)

 999 MP3 files

 250 MP3 files in a single folder

 8 folder levels (in the tree structure of files)

Compatibility with all MP3 encoding/writing software, recording 

device, and recording media cannot be guaranteed. Incompatible 

MP3 discs may produce noise or interrupted audio or may not play 

at all.

*  This include folders that have no MP3 or other files. The number 

of folders that the system can recognize may be less than actual 

number of folders, depending on the folder structure.

 

 (phones) jack

Connect the headphones.

 AUDIO IN jack

Connect an optional audio component.

 Power (DC IN 19.5 V)

Connect the power cord to the AC adapter.

Connect the AC adapter to the unit, and then plug 

the power cord in to a wall outlet.

 Antennas

Find a location and an orientation that provide good 

reception, and then set up the antennas.

Keep the antennas away from the power cord to avoid 

picking up noise.

To use the iPod/iPhone/iPad

Open the dock by pushing the center of the dock.

Dock

Place the iPod/iPhone/iPad.

Note

Be careful not to drop the unit when disconnecting an iPod/iPhone/

iPad from the iPod/iPhone/iPad connector.

Creating your own program 

(Program Play)

Select the CD function.

Press CD FUNCTION 

 on the remote or press 

FUNCTION 

 on the unit repeatedly.

The function indicator lights in yellow.

Select the play mode.

Press PLAY MODE 

 repeatedly until “PGM” 

appears while the player is stopped.

Select a folder (MP3 disc only).

Press   +/

 

 repeatedly to select the desired 

folder. If you want to program all files in the folder, 

press   

.

Select the desired track or file number.

Press 

/

 

 repeatedly until the desired track 

or file number appears.

Selected track or file 

number

Total playing time of the 

selected track or file

Program the selected track or file.

Press   

 to enter the selected track or file.

“--.--” appears when the total playing time exceeds 

100 minutes for an CD or when you program an MP3 

files.

Repeat steps 3 through 5 to program additional 

tracks or files, up to a total of 25 tracks or files.

To play your program of tracks or files, press 

 

 

(or 

 

 on the unit).

The program remains available until you remove the 

disc from the disc slot 

 or unplug the power cord.  

To play the same program again, press 

 

 (or 

 

 on the unit).

To cancel Program Play

Press PLAY MODE 

 repeatedly until “PGM” 

disappears while the player is stopped.

To delete the last track or file of the program

Press and hold SHIFT 

 and CLEAR 

 while the 

player is stopped.

Listening to the radio

Select the TUNER function.

Press FM or AM FUNCTION 

 on the remote or 

press FUNCTION 

 on the unit repeatedly.

The function indicator lights in pink (FM) or sky blue 

(AM).

Perform tuning.

For automatic scanning

Press TUNING MODE 

 repeatedly until “AUTO” 

appears, and then press +/

 

. Scanning stops 

automatically when a station is tuned in, and 

“TUNED” and “STEREO” (for stereo programs only) 

light up in the display.

If “TUNED” does not light up and the scanning does 

not stop, press 

 

 to stop scanning, then perform 

manual tuning (below).

When you tune in a station that provides RDS 

services, information such as the service name or 

station name is provided by broadcasts.

For manual tuning

Press TUNING MODE 

 repeatedly until 

“MANUAL” appears, and then press +/

 

 

repeatedly to tune in the desired station.

Tip

To reduce static noise on a weak FM stereo station, press FM MODE 

 repeatedly until “MONO” appears to turn off stereo reception.

To change the AM tuning interval

The default setting for AM tuning interval is 9 kHz (or 

10 kHz for some areas). Use the buttons on the unit to 

perform this operation.

Press AM FUNCTION 

 on the remote or press 

FUNCTION 

 on the unit repeatedly to select the 

AM station.

Press 

/

 

 to turn off the system.

Press and hold VOL + 

 and press 

/

 

 on the 

unit.

“STEP 9K” or “STEP 10K” appears in the display.

When you change the interval, all the AM preset 

stations are erased.

Presetting radio stations

Tune in the desired station.

Press TUNER MEMORY 

 to select the tuner 

memory mode.

Preset number

Press +/

 

 repeatedly to select the desired preset 

number.

If another station is already assigned to the selected 

preset number, the station is replaced by the new 

station.

 AM loop antenna

 FM lead antenna (Extend it horizontally.)

 To AC Adapter

Unit (Top)

Touch Panel

*

 Display

 Disc slot

Unit (Front)

Function indicator

Remote sensor

iPod/iPhone/iPad connector

Dock indicator

*  The system is set at the factory for the key-

touch confirmation beep to sound when you 

press a touch panel key on the unit. You can 

turn off the beep sound.

*  The system is set at the factory for the key-

touch confirmation beep to sound when you 

press a touch panel key on the unit. You can 

turn off the beep sound.

About the function indicator 

The function indicator lights in different colors according 

to the function. You can tell the current function by the 

color of the indicator.

The indicator color of each function is same color as that 

of the corresponding FUNCTION button on the remote.

Function

Button on the 

remote

Indicator color

FM

FM

Pink

AM

AM

Sky blue

AUDIO IN

AUDIO IN

Amber

CD

CD

Yellow

iPod

iPod

White

Remote

 

 (Illumination) button

Turn ON/OFF the dock indicator 

.

This manual mainly explains operations using the 

remote, but the same operations can also be performed 

using the buttons on the unit having the same or 

similar names.

The function indicated by pink on the remote can be 

activated using SHIFT 

. If you want to operate the 

function indicated by pink, press and hold SHIFT 

 

and press the button of the function indicated by pink. 

If you press the button without holding the SHIFT 

 

pressed the system activates the function indicated by 

white.

To use the remote

Slide and remove the battery compartment lid, and insert 

the two supplied R6 (size AA) batteries, 

 side first, 

matching the polarities shown below.

Notes on using the remote

With normal use, the batteries should last for about 6 months.

Do not mix an old battery with a new one or mix different types of 

batteries.

If you do not use the remote for a long period of time, remove the 

batteries to avoid damage from battery leakage and corrosion.

4-418-711-

13

 (1)

Micro HI-FI

Component System

GB

 Operating Instructions

©2012   Sony Corporation     Printed in China

CMT-V50iP

Отзывы: