18
EN
Chapter 6: Additional Features
To check the timer settings
Press TIMER SELECT until “DAILY”
disappears and appears in the display
again.
The preset items appear sequentially.
To change timer settings
Repeat steps 1 to 8.
Timer-Recording
Radio Programs
You can set the timer to record the radio.
This timer works only once for each setting.
Preset the station beforehand. (See
“Presetting Radio Stations”.)
Make sure the clock is set correctly.
Note
You cannot control with this player the power
on/off and recording start/stop of the
recorder connected to the MD OUT jacks on
the rear. Complete the preparation for timer
recording on the recorder.
Tuner CD player
1
Insert a blank tape with the side you
want to record facing towards you, and
press
(
to start recording from the
front side.
(Prepare the recorder connected to the
MD OUT jacks on the rear for timer
recording.)
2
Press BAND repeatedly until the band
you want appears in the display.
3
Press TUNING/PLAY MODE until
“PRESET” appears in the display.
4
Press /– to tune in the preset
station.
5
Press TIMER SET.
6
Press TIMER +/– to display “REC”, and
press ENTER.
The hour indication flashes.
7
Set the time you want to start recording.
Press TIMER +/– to set the hour, and
press ENTER.
The minute indication flashes.
Set the minute in the same way, and
press ENTER.
The hour indication for the turn-off time
flashes.
8
Set the time you want to stop recording.
Press TIMER +/– to set the hour, and
press ENTER.
The minute indication flashes.
Set the minute in the same way and
press ENTER.
“TO TAPE” or “TO MD” flashes.
9
Press TIMER +/– to select what you
want to record on, and press ENTER.
To record on a tape, display “TO
TAPE”.
To record on an MD, etc., display “TO
MD”.
The preset items appear in the display
sequentially.
10
Press SYSTEM POWER to turn off the
system.
At the preset time, the power will go on
and recording starts. At the turn-off
time, the power will go off again.
At the preset time, the sound level is
automatically set to the minimum and
will be the same level after the turn off
time.
➔
continued
5
Set the time you want the music to come
on.
Press TIMER +/– to set the hour, and
press ENTER.
The minute indication flashes.
Set the minute in the same way and
press ENTER.
The hour indication for the turn-off time
appears.
6
Set the time you want the music to go
off.
Press TIMER +/– to set the hour, and
press ENTER.
The minute indication flashes.
Set the minute in the same way and
press ENTER.
The source indication flashes.
7
Press TIMER +/– to select the source,
and press ENTER.
Source
CD
Radio
Tape
MD, etc.
The preset items appear in the display
sequentially.
*see page 13
8
Press SYSTEM POWER to turn off the
system.
At the preset time, the power will go on
and the music will play. At the turn-off
time, the power will go off again.
To cancel the timer
Press TIMER SELECT repeatedly until
“OFF” appears in the display instead of
“DAILY”.
To set the timer with the same items
Press TIMER SELECT to display “DAILY”,
and press SYSTEM POWER to turn off the
system.
Once you set the timer, you do not have to
set the same items again.
Indication
CD
TUNER
TAPE
PC (or MD)*
DAILY
AM
1
7
0
DAILY
AM
1
8
0
DAILY
CD
POWER
→
ON
TIMER
SELECT
5
2
3
1
10
6, 7,
8, 9
4
ENTER
Stereo cassette deck
2
4
REC
TO
AP
T
E
REC
AM
1
7
0
AM
1
8
0
REC
0
0
AM
0
REC
