37
GB
Net
w
or
k c
o
n
n
ec
tions
9
Select the SSID of the wireless
LAN router/access point, then
input the Security Key (if
applicable).
10
Select [Apply].
11
Select [OK] in the displayed
window.
The system restarts automatically.
12
Connect the Mac or PC to the
wireless LAN router/access point
to be used.
Note
This procedure needs to be completed within 30
minutes. If you cannot complete, start over from
step 3.
Option 3: Method for using a
WPS push button at the
access point supporting
WPS
1
Check whether the network (LAN)
cable (not supplied) is
disconnected.
Disconnect the network (LAN) cable
while the power cord is disconnected if
the network (LAN) cable is connected.
2
Press OPTIONS
to display the
setting menu.
3
Press
/
repeatedly to
select “WPS,” then press
.
“OK” appears in the display
.
•
To cancel the setting, press
/
to
select “CANCEL,” then press
.
4
Press
.
“WPS” flashes.
5
Hold down the WPS button on
the access point for more than 3
seconds.
*
The position and the shape of the WPS
button are different depending on the
model of the access point.
6
“CONNECT” lights up after “WPS”
flashes for several tens of
seconds in the display window of
the system. Make sure that
lights up after a connection has
been made.
Tip
Refer to the operating instructions of your
wireless LAN router/access point for details
on the WPS button.
SSID
WPS button*
