Timer
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-NE5-
NE3\DTP\4253397111\425339711CMTNE5UC2\GB09TIM-CEL.fm]
19
GB
model name[CMT-NE5/CMT-NE3]
[4-253-397-11(2)]
To timer record, you must first preset the radio
station (see “Presetting radio stations” on
page 12) and set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
1
Tune in the preset radio station (see
“Listening to a preset station” on
page 13).
2
Press CLOCK/TIMER SET.
3
Press
./>
repeatedly until “REC”
appears, then press ENTER.
“ON TIME” appears and the hour
indication flashes.
4
Set the time to start recording.
Press
./>
repeatedly to set the hour,
then press ENTER.
The minute indication flashes.
Press
./>
repeatedly to set the
minute, then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
Rec Timer settings and the desired station
appear, then the original display returns.
6
Load a recordable tape.
7
Press
?/1
to turn off the system.
Other operations
Notes
• If you use Rec Timer and Sleep Timer at the same
time, Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
• If the system is on about 15 seconds before the preset
time, Rec Timer will not be activated.
• The volume is reduced to minimum during
recording.
• You cannot activate Play Timer and Rec Timer at the
same time.
• After you have set Rec Timer, do not operate the
system until the recording ends.
Timer recording radio
programs
— Rec Timer
To
Do this
Cancel the timer/
activate the timer/
check the setting
1
Press CLOCK/TIMER
SELECT and “SELECT”
appears.
2
Press
./>
repeatedly
until “PLAY”, “REC” or
“(TIMER) OFF” appears,
then press ENTER.
Change the setting
Start over from step 1.