12
GB
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
Use buttons on the remote for the operation.
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET.
3
Press
.
or
>
repeatedly to set the
hour.
4
Press ENTER.
5
Press
.
or
>
repeatedly to set the
minute.
6
Press ENTER.
The clock starts working.
To adjust the clock
1
Press CLOCK/TIMER SET.
2
Press
.
or
>
repeatedly to select
“CLOCK SET”, then press ENTER.
3
Do the same procedures as step 3 to 6
above.
Note
The clock is not displayed in Power Saving Mode
(page 26).
When carrying this system
Perform the following procedure to protect
the CD mechanism.
Use buttons on the unit for the operation.
1
Press
?/1
to turn on the system, then
press FUNCTION repeatedly to switch
the function to CD.
2
Make sure that all discs are removed
from the system.
3
Hold down ILLUMINATION, and then
press
x
and DISC1 until “LOCK”
appears.
4
Unplug the power cord.
Setting the clock
