background image

Ad
d

itiona

l In

fo

rm
ation

21

GB

In case color irregularity is observed 
on nearby a TV screen

With the magnetically shielded type of speaker system, 
the speakers can be installed near a TV set. However, 
color irregularity may still be observed on the TV 
screen depending on the type of your TV set.

If color irregularity is observed…

Turn off the TV set once, then turn it on after 15 to 30 
minutes.

If color irregularity is observed 
again…

Place the speakers farther away from the TV set.

On operation

• If the system is brought directly from a cold to a 

warm location, or is placed in a very damp room, 
moisture may condense on the lens inside the CD 
player. Should this occur, the system will not operate 
properly. Remove the disc and leave the system 
turned on for about an hour until the moisture 
evaporates.

• When you move the system, take out any disc. 

If you have any questions or problems concerning your 
system, please consult your nearest Sony dealer.

Notes on discs

• Before playing, clean the disc with a cleaning cloth. 

Wipe the disc from the center out.

• Do not use solvents such as benzene, thinner, 

commercially available cleaners or anti-static spray 
intended for vinyl LPs.

• Do not expose the disc to direct sunlight or heat 

sources such as hot air ducts, nor leave it in a car 
parked in direct sunlight.

• Do not use discs encircled with a protection ring. 

This may cause a malfunction to the system.

• When using discs that have glue or similar tacky 

substance on the label side of the disc or that used a 
special ink when the label was printed, there is a 
chance that the disc or label may become attached to 
parts inside this unit. When this occurs, it may not be 
possible to remove the disc, and may also cause this 
unit to malfunction. Be sure to check that the label 
side of the disc is not sticky before using.
The following types of disc should not be used:
– Rental or used discs with attached seals where the 

glue extends beyond the seal. The perimeter of the 
seal on the disc is tacky.

– Discs that have labels printed using a special ink 

that feels tacky when touched.

• Discs with non-standard shapes (e.g., heart, square, 

star) cannot be played on this unit. Attempting to do 
so may damage the unit. Do not use such discs.

Note on CD-R/CD-RW playback

Discs recorded on CD-R/CD-RW drives may not be 
played back because of scratches, dirt, recording 
condition or the drive’s characteristics. Besides, the 
discs, which are not yet finalized at the end of 
recording, cannot be played back.

Music discs encoded with copyright 
protection technologies

This product is designed to playback discs that 
conform to the Compact Disc (CD) standard. Recently, 
various music discs encoded with copyright protection 
technologies are marketed by some record companies. 
Please be aware that among those discs, there are some 
that do not conform to the CD standard and may not be 
playable by this product.

Cleaning the cabinet

Clean the cabinet, panel and controls with a soft cloth 
slightly moistened with mild detergent solution. Do not 
use any type of abrasive pad, scouring powder or 
solvent such as thinner, benzene or alcohol.

To save a tape permanently

To prevent a tape from being accidentally recorded 
over, break off the cassette tab from side A or B as 
illustrated.

 

If you later want to reuse the tape for recording, cover 
the broken tab with adhesive tape.

Before placing a cassette in the tape 
deck

Take up any slack in the tape. Otherwise, the tape may 
get entangled in the parts of the tape deck and become 
damaged.

When using a tape longer than 90 
minutes

The tape is very elastic. Do not change the tape 
operations such as play, stop, and fast-winding 
frequently. The tape may get entangled in the tape 
deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an 
important recording or after playing an old tape.
Use a separately sold dry-type or wet-type cleaning 
cassette. For details, refer to the instructions of the 
cleaning cassette.

Break off the 
cassette tab

continued

Содержание CMT-GP5 - Micro Hi Fi Component System





























Отзывы: