Sony CMT-G2BNIP, Руководство по эксплуатации

Страница: 64 / 84

64 GB
,
Confirm that the server has been correctly set
(page 36). Confirm that the system has been
registered to the server and allows the music
streaming from the server.
,
Confirm that the system and the server are connected
to the wireless LAN router/access point correctly.
Enter the options menu and select “Information” to
check the settings (page 53).
,
Refer to the operating manual of your wireless LAN
router/access point, and check the multicast setting.
If the multicast setting is enabled on the wireless
LAN router/access point, disable it.
,
Shuffle play is selected. Set the play mode to normal
(page 50).
,
Make sure that the audio file you are trying to play is
in a format supported by this system (page 39).
,
WMA files with DRM copyright protection cannot
be played back. For how to check the copyright
protection of a WMA file, see page 66.
,
The bandwidth of your wireless LAN may be too
low. Move the unit and the wireless LAN router/
access point closer to each other, without any
obstacles in between them.
,
When using your computer as a server, the computer
may be running many applications. If anti-virus
software is active on the computer, temporarily
disable the software as it needs large amount of
system resources.
,
Depending on the network environment or any radio
interference, it may not be possible to play tracks
with more than one device operating at the same
time. Turn off another device to enable the system to
play tracks.
,
You cannot play any files other than audio files.
,
Confirm that the server has been correctly set
(page 36). Confirm that the system has been
registered to the server and allows the music
streaming from the server.
,
Check to confirm whether the audio file on the server
has been damaged or erased. Refer to the operating
manual supplied with the server.
,
You cannot play the following tracks:
• A track that violates playback restrictions.
• A track with irregular copyright information.
• A track that you purchased at an online music store
that does not allow home network streaming.
• A track in a format unsupported by the system
(page 39).
,
Confirm that the selected track has not been erased
from the server. If the track has been erased, select
another track.
,
Make sure that the wireless LAN router/access point
is turned on.
,
Make sure that the server is turned on.
,
The server may be unstable. Restart it.
,
Confirm that the system and the server are connected
to the wireless LAN router/access point correctly.
,
If there are no tracks or folders in the selected folder,
you cannot extend the folder to display its contents.
,
For how to check the copyright protection of a WMA
file, see page 66.
,
The track information may have been changed on the
server. Reselect the server in the server list (page 39).
,
“Network Standby” may be set to “Off.” Turn on the
system or set “Network Standby” to “On” (page 53).
,
Confirm that the network is correctly set up. If it is
not, the connection cannot be made (page 53).
,
The device on the device list is set to “Not Allow”
(page 54), or the device is not added to the device list
(page 54).
,
A maximum of 20 connectable devices has been set.
Delete unnecessary devices on the device list, and
then set “Auto Access” to “Allow” (page 54).
,
Server operation of the system is suspended if the
system is conducting one of the following operations.
• Playing a track stored on the server (the system is
operating as a player)
• Updating the system application
• Formatting the system
,
The system cannot stream audio content to multiple
players. The system can connect to only one player at
a time.
“No Server” appears on the display, or the
system cannot join a PARTY.
You cannot play audio data normally.
Play does not start, or does not automatically
change to the next track or file.
The sound skips during playback.
“Cannot Play” appears.
“No Track” appears.
You cannot play a copyrighted WMA format
track.
You cannot select a previously selected track.
Devices on the home network cannot connect
to the system.