background image

2

GB

To prevent fire or shock hazard, do not 
expose the unit to rain or moisture.

To prevent fire, do not cover the ventilation of the 
apparatus with news papers, table-cloths, curtains, etc. 
And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects 
filled with liquids, such as vases, on the apparatus.

This appliance is 
classified as a CLASS 1 
LASER product. This 
label is located on the 
rear exterior.

Don’t throw away the battery with 
general house waste, dispose of it 
correctly as chemical waste.

Except for European model

E

NERGY

 S

TAR

®

 is a U.S. 

registered mark. As an E

NERGY

 

S

TAR

®

 partner, Sony Corporation 

has determined that this product 
meets the E

NERGY

 S

TAR

®

 

guidelines for energy efficiency.

NOTICE FOR THE CUSTOMERS IN 
THE U.S.A.

This symbol is intended to alert the user to 
the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that 
may be of sufficient magnitude to constitute 
a risk of electric shock to persons.

This symbol is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

CAUTION

The use of optical instruments with this product will 
increase eye hazard.

WARNING

This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation. This 
equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there 
is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and 

receiver.

– Connect the equipment into an outlet on a circuit 

different from that to which the receiver is 
connected.

– Consult the dealer or an experienced radio/TV 

technician for help.

CAUTION

You are cautioned that any changes or modifications 
not expressly approved in this manual could void your 
authority to operate this equipment.

Note to CATV system installer:

This reminder is provided to call the CATV system 
installer’s attention to Article 820-40 of the NEC that 
provides guidelines for proper grounding and, in 
particular, specifies that the cable ground shall be 
connected to the grounding system of the building, as 
close to the point of cable entry as practical.

NOTICE FOR THE CUSTOMERS IN 
CANADA

CAUTION

TO PREVENT ELECTRIC SHOCK, DO NOT USE 
THIS POLARIZED AC PLUG WITH AN 
EXTENSION CORD, RECEPTACLE OR OTHER 
OUTLET UNLESS THE BLADES CAN BE FULLY 
INSERTED TO PREVENT BLADE EXPOSURE.

This manual mainly explains operations using 
the remote, but the same operations can also be 
performed using the buttons on the system 
having the same or similar names.

WARNING

Do not install the appliance in a confined space, 
such as a bookcase or built-in cabinet.

How to use this manual

Содержание CMT-EP515 - Micro Hi Fi Component System





























Отзывы: