Sony CMT-EP313 - Micro Hi Fi Component System, Руководство по эксплуатации

Страница: 8 / 24

8
GB
Other operations
Tip
The program you made remains after Program Play
finishes. To play the same program again, press CD
N
. However, the program is cleared when you open
the lid of the CD compartment.
You can preset up to 32 stations for FM and AM.
You can then tune in any of those stations
simply by selecting the corresponding preset
number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
1
Press TUNER BAND repeatedly to
select FM or AM.
2
Press and hold /– until the
frequency indication starts to change,
then release it.
Scanning stops automatically when a
station is tuned in. At that time, “TUNED”
and “STEREO” (for stereo program only)
appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 through 4 of
“Manual tuning preset” (page 9).
3
Press TUNER MEMORY.
The preset number appears. Station storage
starts with preset number 1. If preset
stations have been erased, then stations are
stored to the lowest preset number
containing no station.
4
Repeat steps 1 through 3 to preset
other stations.
To Do this
Cancel Program
Play Press PLAY MODE/
DIRECTION in stop mode
repeatedly until both
“PROGRAM” and “SHUF”
disappear.
Add a track to the
end of the program Perform steps 1 – 4 in stop mode.
Erase the program Press CLEAR in stop mode.
Each time you press the button, a
track is cleared from the end of
the program.
Tuner
Presetting radio stations
Preset number