![background image](http://html.mh-extra.com/html/sony/cmt-dc1/cmt-dc1_service-manual_420302005.webp)
4
HCD-DC1
SECTION 1
SERVICING NOTES
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
SERVICE POSTION
In checking the CD block, prepare jig (extension cable J-2501-
011-B).
Connect jig (extension cable J-2501-011-B)
to the MAIN board (CN101) and CD board (CN101).
MAIN board
CD board
• MODEL IDENTIFICATION
– Rear Panel –
Power Voltage
Incdication
AC: 120 V 60 Hz 75 W
AC: 230 V
-
50/60 Hz 75 W
AC: 110 – 120/
220 – 240 V / 50/60 Hz 75 W
Model
US, CND, MX models
AEP, UK models
HK, MY, SP models
• Abbreviation
CND : Canadian model
HK
: Hong Kong model
MX
: Mexican model
MY
: Malaysia model
SP
: Singapore model
Power Voltage Indication
VOLTAGE SELECTOR
Switch
(HK, MY, SP models)
Содержание CMT-DC1
Страница 55: ...3 SS CDC1 MEMO ...