CMT-BT60/BT60B/BT80W/BT80WB
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2013.03
New
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF
fi
le search function to
fi
nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note:
If you still see the original page, press the [Enter] key again.
Содержание CMT-BT60
Страница 85: ...MEMO CMT BT60 BT60B BT80W BT80WB 85 ...