background image

Tape/Sound Adjustment

21

GB

To

Do this

Sound Adjustment

Activate/check
the setting

Press CLOCK/TIMER
SELECT on the remote and
press 

.

 or 

>

 on the

remote to select “REC
SELECT?”, then press
ENTER/YES.

Change the setting

Start over from step 1.

Cancel the timer

Press CLOCK/TIMER
SELECT on the remote and
press 

.

 or 

>

 on the

remote to select “TIMER
OFF”, then press ENTER/
YES.

Notes

• When you use the recording timer at the same time

as the Sleep Timer, the Sleep Timer setting has
priority.

• You cannot activate the Daily Timer and the

recording timer at the same time.

• The system automatically turned on about 30

seconds before the preset time. Do not operate the
system until the recording starts.

• If the system is on about 30 seconds before the

preset time, the timer-recording will not be
activated.

• The volume is reduced to minimum during

recording.

Adjusting the sound

Enjoying the powerful sound

— GROOVE

You can listen to music with more powerful
sound.

Press GROOVE.

“GROOVE” appears in the display and the
volume switches to power mode (DBFB is also
turned on).
Press again to cancel GROOVE.
DBFB is also canceled.

Tip

GROOVE is factory set to on.

Reinforcing the bass sound

— DBFB

You can listen to music with stronger bass
tones.

Press DBFB

*

.

“DBFB” appears in the display and the bass is
reinforced.
Press again to cancel DBFB.

* DBFB: Dynamic Bass Feedback

Tip

DBFB is factory set to on.

Selecting the surround effect

Press SURROUND.

“SURROUND” appears in the display.
Press again to cancel SURROUND.

Содержание CHC-TB20





































Отзывы: