8
GB
Setting the clock
1
Turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
“CLOCK” appears.
3
Press
.
or
>
on the remote to set
the hour.
4
Press ENTER.
The minute indication flashes.
5
Press
.
or
>
on the remote to set
the minute.
6
Press ENTER.
The clock starts working.
Tip
If you make a mistake while setting the clock,
press
x
, then start over from step 2.
To adjust the clock
1
Press CLOCK/TIMER SET on the remote.
2
Press
.
or
>
on the remote to select
“CLOCK”, then press ENTER.
3
Do the same procedures as step 3 to 6
above.
Note
You cannot set the clock in the Power Saving Mode.
When you play
a CD single (8
cm CD), place
it on the inner
circle of the
tray.
3
Press
Z
again to close the disc tray.
CD
Loading a CD
1
Press
Z
.
The disc tray opens.
2
Place a CD with the label side up on the
disc tray.
