I
Connecting optional
components
Before making connections, be sure to turn off the power of
the component and set FUNCTION to TAPE/RADIO OFF on
the player.
After connecting the component, set FUNCTION to CD/TV
LINE IN and play the connected component.
Tip
You can record sound from the connected component. Insert a
cassette, and press
r
.
Note
Connect the cables firmly to avoid any malfunction.
Using the microphone
Turn on the microphone if it has a power switch.
Tips
• To mix radio or tape sounds and your voice, play the sound you
want, and speak or sing into the microphone. To record mixed
sounds, insert a cassette, and press
r
.
• To record through a microphone, set FUNCTION to TAPE/
RADIO OFF, and start recording.
• To use the player as a public address system, set FUNCTION to
TAPE/RADIO OFF, eject the cassette, and then press
(
.
Note
If acoustic feedback (howling) occurs, turn down the volume or
move the microphone away from the speakers.
a
]
}
]
}
RIG
HT
LE
FT
SPEAKER
b
1
2
Setting up the system
Connecting the Speakers
Make sure you turn off the power before making connections.
Specifications
There is no audio.
• Connect the mains lead
securely.
• Insert the batteries properly.
• Replace all batteries if they are
weak.
• Unplug the headphones.
• Adjust the volume.
• Set FUNCTION to the position
you want to operate.
Cassette cannot be
inserted.
• Insert the cassette properly.
The
r
button does not
function.
• No cassette is in the tape
compartment.
• Make sure the safety tab on the
cassette is in place.
Poor playback,
recording or erasing
quality.
• Dirty heads. Clean the unit (as
shown) with a cotton swab
slightly moistened with
cleaning fluid or alcohol.
• Demagnetize the heads and all
metal parts in the tape path
with a commercially available
tape head demagnetizer.
•
Frequency range
CFS-1058
FM: 87.6–108MHz
AM: 530–1,710kHz
CFS-1058S
FM: 87.6–108MHz
MW: 530–1,605kHz/SW1: 2.3–
7MHz/SW2: 7–22MHz
•
IF
FM: 10.7MHz/AM/MW/SW:
455kHz
•
Aerials
FM/SW: Telescope/AM/
MW: Built-in ferrite bar
•
Recording system
4-track, 2-
channel stereo
•
Frequency response
100–10,000Hz
•
Speakers
Woofer: 10cm (4 inches)
dia. , cone type/Tweeter: 2 cm (
4
/
5
inches) dia.
•
Input
CD/TV LINE IN
jacks(phono jacks), sensitivity
0.3 V, input impedance 47 kilohms
Mixing microphone input jack
(mini jack), sensitivity 3 mV. for
low impedance microphone
•
Output
Headphones jack (stereo
minijack), for 16–68 ohms
impedance headphones
•
Maximum Power output
2.3W+2.3W
•
Battery life
FM Recording: Sony R20P: Approx.
16 hours/Sony LR20 alkaline:
Approx. 36 hours
Playback: Sony R20P: Approx. 8
hours/Sony LR20 alkaline:
Approx. 21 hours
•
Power requirements
110–120V/220–240 V AC
selectable, 50/60Hz
9V DC, six R20 (size D) batteries
•
Power consumption
AC 14W
• Dimensions
Approx. 579 x 206 x
197 mm (w/h/d) ( 22
7
/
8
x 8
1
/
8
x
7
7
/
8
inches) incl. projecting parts
and controls, not incl. handle
• Mass
Approx. 4.6kg (10 lb 2 oz)
incl. batteries
• Supplied accessory
AC power
cord (1), Vietnam model only:
Microphone (1)
Design and specifications are
subject to change without notice.
1
Align the grooves and slide the speaker box
down until it snaps into place
a
.
2
Connect the black wires to (–) minus and the red
wires to (+) plus terminals: the right speaker
wires to the RIGHT, and the left speaker wires to
the LEFT terminals.
Tip
To detach the speakers, unlock the speaker
b
and slide the
speaker box all the way up and away from the player.
©1996 by Sony Corporation
Printed in Bangladesh
3-858-469-31(1)
Operating Instructions
WARNING
Troubleshooting
Cotton swab
Erase head
Capstan
Pinch roller
Record/
Playback
head
Choosing Power Sources
To use the player on AC power source (mains)
Connect the supplied AC power cord to the AC IN jack.
To use the player on batteries
Insert six R20 (size D) batteries (not supplied) into the battery
compartment.
To adjust the voltage
Be sure to set the VOLTAGE
SELECTOR(at the rear) to your local
power supply.
To prevent fire or shock hazard,
do not expose the player to rain
or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing
to qualified personnel only.
Precautions
On safety/power sources
• Should any solid object or liquid
fall into the player, unplug the
player, and have it checked by
qualified personnel before
operating it any further.
• For AC operation, check that the
player’s operating voltage is
identical with your local power
supply (see “Specifications”) and
use the supplied mains lead; do
not use any other type. The
voltage selector is located on the
rear of the player.
• The player is not disconnected
from the AC power source
(mains) as long as it is connected
to the wall outlet, even if the
player itself has been turned off.
• For battery operation, use six R20
(size D) batteries.
• When the batteries are not to be
used, remove them to avoid
damage that can be caused by
battery leakage or corrosion.
• The nameplate indicating
operating voltage, power
consumption, etc. is located at the
rear.
Radio
Cassette-
Corder
On placement/operation
• Do not leave the player in a
location near heat sources, or in a
place subject to direct sunlight,
excessive dust or mechanical
shock.
• Do not place anything within 10
mm of the side of the cabinet. The
ventilation holes must be
unobstructed for the player to
operate properly and to prolong
the life of its components.
• Since a strong magnet is used for
the speakers, keep personal credit
cards using magnetic coding or
spring-wound watches away from
the player to prevent possible
damage from the magnet.
• If the player has not been used for
a long time, set it in the playback
mode to warm it up for a few
minutes before inserting a cassette.
If you have questions or problems
concerning your player, please
consult your nearest Sony dealer.
R (red)
L (white)
Audio Connecting cord
RK-C520HG (not supplied)
Notes
• To use the player on batteries, disconnect the mains lead from
the player.
• Replace the batteries when the OPR/BATT indicator dims or
when the player stops operating. Replace all batteries with new
ones.
2
to a wall outlet
1
to AC IN
220 – 240V
110 – 120V
VOLTAGE
SELECTOR
to CD/TV LINE IN
CFS-1058
CFS-1058S
L LINE IN R
CD/TV
MIX
MIC
