– 29 –
– 30 –
– 27 –
– 28 –
CFD-S27
1
IC701
#¡
(RFO)
r
Waveforms
1.0 – 1.4
Vp-p
VOLT/DIV : 200 mV AC
TIME/DIV : 0.5
µ
sec
4
IC702
#¡
(MNT3)
VOLT/DIV : 1 V AC
TIME/DIV : 50
µ
sec
2
IC702
@∞
(XPCK)
VOLT/DIV : 1 V AC
TIME/DIV : 0.1 msec
5
IC702
#™
(MNT1)
VOLT/DIV : 1 V AC
TIME/DIV : 50
µ
sec
3
IC702
@•
(RFCK)
VOLT/DIV : 1 V AC
TIME/DIV : 50
µ
sec
6
IC702
#∞
(XTAO)
VOLT/DIV : 0.2 V AC
TIME/DIV : 50 nsec
4.8 Vp-p
242.0
µ
sec
5.3 Vp-p
140.5
µ
sec
5.3 Vp-p
140.5
µ
sec
5.3 Vp-p
140.5
µ
sec
1.1 Vp-p
16.9344 MHz
(PLAY MODE)
r
Refer to page 32 for IC Block Diagrams.
5-5. SCHEMATIC DIAGRAM – MAIN SECTION (2/2) – (FORMER TYPE)
Note:
• All capacitors are in
µ
F unless otherwise noted. pF:
µµ
F
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
Note: The components identified by mark
!
or dotted
line with mark
!
are critical for safety.
Replace only with part number specified.
•
U
: B+ Line.
•
H
: adjustment for repair.
• Power voltage is dc 9V and fed with regulated dc power
supply from battery terminal.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
no mark : CD STOP
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
• Circled numbers refer to waveforms.
• Signal path.
J
: CD
