16
Error displays/Messages
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at
the time the problem began.
Radio reception
The stations cannot be received.
The sound is hampered by noises.
• Connect a power aerial control lead (blue) or
accessory power supply lead (red) to the power
supply lead of a car’s aerial booster (only when
your car has built-in FM/AM aerial in the rear/
side glass).
• Check the connection of the car aerial.
• The auto aerial will not go up.
t
Check the connection of the power aerial
control lead.
• Check the frequency.
Preset tuning is not possible.
• Store the correct frequency in the memory.
• The broadcast signal is too weak.
Automatic tuning is not possible.
• Setting of the local seek mode is not correct.
t
Tuning stops too frequently:
Press
(SENS)
until “LOCAL-ON” appears.
t
Tuning does not stop at a station:
Press
(SENS)
repeatedly until “MONO-
ON” or “MONO-OFF” (FM), or “LOCAL-
OFF” (AM) appears.
• The broadcast signal is too weak.
t
Perform manual tuning.
During FM reception, the “ST” indication
flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
t
Press
(SENS)
to set the monaural reception
mode to “MONO-ON.”
An FM programme broadcast in stereo is
heard in monaural.
The unit is in monaural reception mode.
t
Press
(SENS)
until “MONO-OFF” appears.
ERROR
• The disc is dirty or inserted upside down.
t
Clean or insert the disc correctly.
• The disc cannot play because of some problem.
t
Insert another disc.
FAILURE
The speaker/amplifier connection is incorrect.
t
See the supplied installation/connections
manual to check the connection.
L.SEEK +/–
The local seek mode is on during automatic
tuning.
NO ID3
ID3 tag information is not written in the MP3
file.
NO INFO
Text information is not written in the ATRAC3/
ATRAC3plus file.
NO MUSIC
The disc is not a music file.
t
Insert a music CD.
NO NAME
A track/group/disc name is not written in the
track.
OFFSET
There may be an internal malfunction.
t
Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
READ
The unit is reading all track and group
information on the disc.
t
Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
RESET
The unit cannot be operated because of some
problem.
t
Press the RESET button (page 4).
“
” or “
”
During fast-forward or reverse, you have reached
the beginning or the end of the disc and you
cannot go any further.
“
”
The character cannot be displayed with the unit.
Содержание CDX-S2210C
Страница 17: ......
Страница 37: ...5 安裝前面板 如圖所示將前面板的 A 部分安裝至本機的 B 部分 然後推進左端直至聽到喀嗒聲 註 不要在前面板内表面上放任何東西 B A ...
Страница 64: ...Sony Corporation Printed in Thailand ...