Sony CDX-R6550, Руководство по эксплуатации

Страница: 11 / 100

11
CDX-R6550
2-348-439-21 (1)
H:\Data Disk\2348439211\234843921CDXR6550EUR\01GB02CD-EUR.fm masterpage:Right H:\Data Disk\2348439211\234843921CDXR6550EUR\01GB02CD-EUR.fm masterpage:Right
Other functions
Changing the sound settings
Adjusting the sound
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press
(SEL)
repeatedly until “BAL,”
“FAD” or “SUB” appears.
The item changes as follows:
LOW
*
1 t MID
*
1 t HI
*
1 t
BAL (left-right)
t
FAD (front-rear)
t
SUB
(subwoofer volume)*
2
*1 When EQ3 is activated (page 11).
*2 When the audio output is set to “SUB”
(page 11).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
2
Press the /– button
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press
< , M , ,
or m .
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings
for different tone ranges.
1
Select a source, then press (EQ3)
repeatedly to select the EQ3 type.
2
Press (SEL) repeatedly until “LOW,”
“MID” or “HI” appears.
3
Press the /– button
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold
(SEL)
before the setting is
complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 3, to adjust the selected item, press
< , M , ,
or m .
Adjusting setup items — SET
1
Press and hold (SEL) .
The setup display appears.
2
Press
(SEL)
repeatedly until the
desired item appears.
3
Press the /– button to select
the setting (example “ON” or “OFF”).
4
Press and hold (SEL) .
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press
< or , .
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
CLOCK-ADJ
(Clock Adjust)
(page 4)
CT (Clock Time)
To set “ON” or “OFF” (
z
) (page 9, 10).
BEEP
To set “ON” (
z
) or “OFF.”
SUB/REAR
*
1
To switch the audio output.
– “SUB” (
z
): to output to a subwoofer.
– “REAR”: to output to a power amplifier.
DIM (Dimmer)
To change the brightness of the display.
– “AT” (
z
): to dim the display automatically
when you turn the lights on.
– “ON”: to dim the display.
– “OFF”: to deactivate the dimmer.
CONTRAST
To adjust the contrast of the display.
The contrast level is adjustable in 7 steps.
M.DSPL * 2 (Motion Display)
To select the Motion Display mode.
– “SA” (
z
): to show moving patterns and
spectrum analyzer.
– “ON”: to show moving patterns.
– “OFF”: to deactivate the Motion Display.
DEMO * 1 (Demonstration)
To set “ON” (
z
) or “OFF” (page 4).
continue to next page
t
00GB+00COV-EUR.book Page 11 Monday, November 8, 2004 1:50 PM