Sony CDX-MP80, Руководство по эксплуатации

Страница: 17 / 96

17
Storing only desired stations
You can manually preset desired stations.
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press the –
m
or
M
+ button to tune
in the station that you want to store.
4
Press
(MENU)
, then rotate the
. / > control dial until “Preset
Edit” appears.
5
Press the . / > control dial.
6
Rotate the . / > control dial to
select the number that you want to
store.
7
Press the . / > control dial.
The stored station indication appears in the
display.
8
Press (MENU) twice.
Note
If you try to store another station on the same stored
number, the previously stored station will be erased.
Operating with the card remote
commander
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press
(SEEK -)
or
(SEEK +)
to tune in
the station that you want to store.
4
Press the desired number button (
(1)
to (6) ) until “MEM” appears.
Storing station names
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1
Tune in a station whose name you
want to store.
2
Press
(MENU)
, then rotate the
. / > control dial until “Name Edit”
appears.
3
Press the . / > control dial.
4
Enter the characters.
1 Rotate the
.
/
>
control dial to
select the desired character.
A
y
B
y
C
... y
0
y
1
y
2
... y
+ y – y * ... y * y
A
*
(blank space)
2 Press the
M
+ button after locating
the desired character.
If you press the – m button, you can
move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
Press the . / > control dial.
Tips
• Simply overwrite or enter “
” to correct or erase a
name.
• There is another way to start storing station names:
Press (LIST) for 2 seconds instead of performing
steps 2 and 3. You can also complete the operation
by pressing
(LIST)
for 2 seconds instead of step 5.
• If no memory is remaining, “Mem Full” appears in
the display, and you cannot assign a station name.
. / > control
dial
continue to next page t