22
Adjusting the balance and
fader
You can adjust the balance and fader.
1
Press
(SEL)
repeatedly until “BAL” or
“FAD” appears.
Each time you press
(SEL)
, the item changes
as follows:
LOW
*
t
MID
*
t
HI
*
t
BAL (left-right)
t
FAD (front-rear)
*
When EQ3 is activated (page 23).
2
Press the /– button to adjust
the selected item.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
Press
(ATT)
.
After “ATT-ON” momentarily appears, the
“ATT” appears in the display.
To restore the previous volume level, press
(ATT)
again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
Changing the sound and
display settings
— Menu
The following items can be set:
SET (Set Up)
• CT (Clock Time) (page 20)
• A.SCRL (Auto Scroll)*
1
(page 12).
• M.DSPL (Motion Display) — to select the
Motion Display mode from “1,” “2,” and
“OFF.”
– Select “1” to show decoration patterns in the
display and activate Demo display.
– Select “2” to show decoration patterns in the
display and deactivate Demo display.
– Select “OFF” to deactivate the Motion
Display.
• BEEP*
2
— to turn the beeps on or off.
Selecting the desired item
Press
(SEL)
and the desired preset
number button simultaneously.
(SEL)
+
(2)
: CT
(SEL)
+
(3)
: A.SCRL
*
1
(SEL)
+
(4)
: M.DSPL
(SEL)
+
(6)
: BEEP
*
2
*1
When no CD is playing, this item will not
appear.
*2
The beep sound is output only when the built-in
amplifier is used.
After the mode setting completed, the display
returns to normal play mode.
Note
The displayed item will differ depending on the source.
To cancel the item, press
(SEL)
and the preset
number button simultaneously again.
