15
RECEIVE MODE
SOUND
LIST
*1
When the unit is turned off.
*2
When FM is received.
*3
In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.
Using optional equipment
CD/MD changer
Selecting the changer
1
Press
(SOURCE)
repeatedly until “CD” or
“MD” appears.
2
Press
(MODE)
repeatedly until the desired
changer appears.
Playback starts.
*1
When MP3 is played.
*2
When MDLP disc is played.
Skipping discs
1
During playback, press
(ENTER)
until
“DISC” appears.
2
Rotate the SEEK control dial until the desired
disc appears.
Skipping album and discs with the
card remote commander
1
During playback, press
M
or
m
.
Auto Scroll
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– “off” (
z
): to not scroll.
– “on”: to scroll.
Local
(Local seek mode)
– “off” (
z
): to tune normal reception.
– “on”: to only tune into stations with stronger
signals.
Mono
(Monaural mode)*
2
To improve poor FM reception, select monaural
reception mode.
– “off” (
z
): to hear stereo broadcast in stereo.
– “on”: to hear stereo broadcasts in monaural.
IF
– “Auto” (
z
): to narrow automatically the
reception frequency to eliminate noise.
– “Wide”*
3
: to always hear FM stereo
broadcasts in stereo and with full the
frequency signal reception.
BTM
HDEQ
DSO 3D
I-TA
Front HPF
(High Pass Filter)
To select the front speaker cut-off frequency:
“off” (
z
), “63Hz,” “78Hz,” “100Hz,” “125Hz”
or “160Hz.”
Rear HPF
(High Pass Filter)
To select the rear speaker cut-off frequency:
“off” (
z
), “63Hz,” “78Hz,” “100Hz,” “125Hz”
or “160Hz.”
LPF
(Low Pass Filter)
To select the subwoofer cut-off frequency: “off”
(
z
), “63Hz,” “78Hz,” “100Hz,” “125Hz” or
“160Hz.”
BBE MP
Loudness
To allow you to listen clearly at low volume
levels.
– “on”: to reinforce bass and treble.
– “off” (
z
): to not reinforce bass and treble.
AUX Level
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 16).
When the radio or CD/MD changer is used, the
station frequency, or CD/MD number/track
name is displayed.
To skip
Press
M
or
m
.
album
and release (hold for a
moment).
album
continuously
within 2 seconds of first
releasing.
discs
repeatedly.
discs
continuously
then, press again within 2
seconds and hold.
continue to next page
t
Disc/Album number
Unit number, MP3 indication
*
1
LP2/LP4 indication
*
2