18
*1 When the unit is turned off.
*2 When the audio output is set to “SUB-OUT”
or Rear Bass Enhancer is set to other than
“OFF.”
*3 When the audio output is set to “SUB-OUT.”
CAUT ALM
*
1
(Caution Alarm)
Activates the caution alarm: “ON,”
“OFF” (page 4).
AUX-A
*
1
(AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 19).
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
REAR/SUB
*
1
Switches the audio output: “SUB-OUT”
(subwoofer), “REAR-OUT” (power
amplifier).
DEMO
(Demonstration)
Activates the demonstration: “ON,”
“OFF.”
DIMMER
Changes the display brightness: “ON,”
“OFF.”
M.DISPLAY
(Motion Display)
– “SA”: to show moving patterns and
spectrum analyzer.
– “OFF”: to deactivate the Motion Display.
AUTO SCR
(Auto Scroll)
Scrolls long items automatically: “ON,”
“OFF.”
ZAP TIME
(Zappin Time)
Selects the playback time for the
ZAPPIN function.
– “Z.TIME-1 (about 6 seconds),”
“Z.TIME-2 (about 15 seconds),”
“Z.TIME-3 (about 30 seconds).”
ZAP BEEP
(Zappin Beep)
Has the beep sound between track
passages: “ON,” “OFF.”
LPF FREQ
*
2
(Low Pass Filter Frequency)
Selects the subwoofer cut-off frequency:
“50Hz,” “60Hz,” “80Hz,” “100Hz,”
“120Hz.”
LPF SLOP
*
2
(Low Pass Filter Slope)
Selects the LPF slope: “1,” “2,” “3.”
SW PHASE
*
3
(Subwoofer Phase)
Selects the subwoofer phase: “NORM,”
“REV.”
HPF FREQ
(High Pass Filter Frequency)
Selects the front/rear speaker cut-off
frequency: “OFF,” “50Hz,” “60Hz,”
“80Hz,” “100Hz,” “120Hz.”
HPF SLOP
(High Pass Filter Slope)
Selects the HPF slope (effective only
when HPF FREQ is set to other than
“OFF”): “1,” “2,” “3.”
LOUDNESS
(Dynamic Loudness)
Reinforces bass and treble for clear
sound at low volume levels: “ON,”
“OFF.”
ALO
(Automatic Level Optimizer)
Adjust the playback volume level of all
playback sources to the optimum level:
“ON,” “OFF.”
BTM
