7
J
DSPL (display)/SCRL (scroll) button
(CDX-GT370S/GT370/GT270S/GT270)
To change display items (press); scroll the
display item (press and hold).
DSPL (display) button (CDX-GT170S/
GT170)
To change display items.
K
SEEK –/+ buttons
CD
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio
:
To tune in stations automatically (press); find
a station manually (press and hold).
L
MODE button
To select the radio band (FM/MW/SW)*.
M
To start the BTM function (press and hold).
N
RESET button
(located behind the front
panel)
(CDX-GT370S/GT370 only)
O
Frequency select switch
(located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
P
Number buttons
CD
:
(1)
/
(2)
:
ALBUM –/+
(during MP3/WMA
playback)
(CDX-GT370S/GT370/
GT270S/GT270)
To skip albums (press); skip albums
continuously (press and hold).
(3)
:
REP
(4)
:
SHUF
(6)
:
PAUSE
To pause playback of a CD on this unit.
To cancel, press again.
Radio
:
To receive stored stations (press); store
stations (press and hold).
Q
Receptor for the card remote
commander (CDX-GT370S/GT370/
GT270S/GT270 only)
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 5) (CDX-GT370S/GT370/GT270S/
GT270 only).
qk
<
(
.
)/
,
(
>
) buttons
To control CD/radio, the same as
(SEEK)
–/+ on the unit.
Setup, sound setting, etc., can be operated by
<
,
.
ql
DSPL (display) button
To change display items.
w;
VOL (volume) +/– button
To adjust volume.
wa
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws
SEL (select) button
The same as the select button on the unit.
wd
M
(+)/
m
(–) buttons
To control CD, the same as
(1)
/
(2)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M
m
.
wf
SCRL (scroll) button
To scroll the display item.
wg
Number buttons
To receive stored stations (press); store
stations (press and hold).
*
In the case of a CD/MD changer being connected;
when
(SOURCE)
is pressed, the connected device
(“MD”) will appear in the display, depending on
which device is connected. Furthermore, if
(MODE)
is pressed, you can switch the changer (CDX-
GT370S/GT370 only).
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.