16
Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the control dial to select the
setting (example “ON” or “OFF”).
4
Press and hold the select button.
The setup is complete and the display returns
to normal reception/play mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
*1
When the unit is turned off.
*2
When FM is received.
*3
When the audio output is set to “SUB-OUT.”
CLOCK-ADJ
(Clock Adjust) (page 6)
CT
(Clock Time)
Activates the CT function: “ON,” “OFF”
(page 12, 13).
BEEP
Activates the beep sound: “ON,” “OFF.”
AUX-A
*
1
(AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 17).
A.OFF
(Auto Off)
Shuts off automatically after a desired time
when the unit is turned off: “NO,” “30S
(Seconds),” “30M (Minutes),” “60M (Minutes).”
SUB/REAR
*
1
Switches the audio output: “SUB-OUT”
(subwoofer), “REAR-OUT” (power amplifier).
DEMO
(Demonstration)
Activates the demonstration: “ON,” “OFF.”
DIM
(Dimmer)
Changes the display brightness: “ON,” “OFF.”
A.SCRL
(Auto Scroll)
Scrolls long items automatically: “ON,” “OFF.”
LOCAL
(Local Seek Mode)
– “ON”: to only tune into stations with stronger
signals.
– “OFF”: to tune normal reception.
MONO
*
2
(Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: “ON,” “OFF.”
REG
*
2
(Regional)
Restricts reception to a specific region: “ON,”
“OFF” (page 12).
Z.TIME
(Zappin Time)
Selects the playback time for the ZAPPIN
function.
– “Z.TIME-1 (about 6 seconds),” “Z.TIME-2
(about 9 seconds),” “Z.TIME-3 (about 30
seconds).”
LPF
*
3
(Low Pass Filter)
Selects the subwoofer cut-off frequency: “OFF,”
“55Hz,” “85Hz,” “120Hz.”
LOUD
(Loudness)
Reinforces bass and treble for clear sound at low
volume levels: “ON,” “OFF.”
BTM
