background image

11

Playback order of MP3/WMA files

Notes

When naming an MP3 file/WMA file, be sure to add 
the file extension “.mp3”/“.wma” to the file name.

During playback of a VBR (variable bit rate) MP3/
WMA file or fast-forward/reverse, elapsed playing 
time may not display accurately.

When the disc is recorded in Multi Session, only the 
first track of the first session format is recognized 
and played (any other format is skipped). The 
priority of the format is CD-DA and MP3/WMA.
– When the first track is a CD-DA, only CD-DA of the 

first session is played.

– When the first track is not a CD-DA, an MP3/WMA 

session is played. If the disc has no data in any of 
these formats, “NO MUSIC” is displayed.

Notes on MP3

Be sure to finalize the disc before using on the unit.

If you play a high-bit-rate MP3, such as 320 kbps, 
sound may be intermittent.

Notes on WMA

Files made with lossless compression are not 
playable.

Files protected by copyright are not playable.

If you have any questions or problems concerning 
your unit that are not covered in this manual, consult 
your nearest Sony dealer.

Maintenance

Fuse replacement

When replacing the fuse, be 
sure to use one matching the 
amperage rating stated on the 
original fuse. If the fuse blows, 
check the power connection and 
replace the fuse. If the fuse 
blows again after replacement, 
there may be an internal 
malfunction. In such a case, 
consult your nearest Sony 
dealer.

Cleaning the connectors

The unit may not function properly if the connectors 
between the unit and the front panel are not clean. In 
order to prevent this, detach the front panel (page 4) 
and clean the connectors with a cotton swab. Do not 
apply too much force. Otherwise, the connectors 
may be damaged.

Notes

For safety, turn off the ignition before cleaning the 
connectors, and remove the key from the ignition 
switch.

Never touch the connectors directly with your fingers 
or with any metal device.

Removing the unit

1

Remove the protection collar.

1

Detach the front panel (page 4).

2

Engage the release keys together with the 
protection collar.

3

Pull out the release keys to remove the 
protection collar.

Folder 
(album)

MP3/WMA file 
(track)

MP3/WMA

Fuse (10A)

continue to next page 

t

Main unit

Back of the front 
panel

Orient the release 
keys as shown.

Содержание CDX-GT21W - 200w Cd Receiver

































Отзывы: