background image

32

Troubleshooting guide

Problem

No sound.

The contents of the memory
have been erased.

Indications do not appear in the
display.

Cause/Solution

•Cancel the ATT function.
•Set the fader control to the center position for two-speaker

systems.

•Rotate the dial in a clockwise direction to adjust the volume.

• The power cord or battery has been disconnected.
• The reset button was pressed.

n

 Store again into the memory.

Remove the front panel and clean the connectors. See
“Cleaning the connectors” (page 30) for details.

CD/MD playback

Cause/Solution

•Another CD is already loaded.
•The CD is forcibly inserted upside down or in the wrong way

(MD).

Defective MD or dusty CD.

The ambient temperature exceeds 50°C (122°F).

Press the reset button.

• The unit is installed at an angle of more than 60°.
• The unit is not installed in a sturdy part of the car.

Problem

A disc cannot be loaded.

Playback does not begin.

A disc is automatically ejected.

The operation buttons do not
function.

The sound skips due to
vibration.

Radio reception

Problem

Preset tuning is not possible.

Automatic tuning is not
possible.

The “ST” indication flashes.

Cause/Solution

• Memorize the correct frequency.
• The broadcast signal is too weak.

The broadcast signal is too weak.

n

 Use manual tuning.

•Tune in the frequency accurately.
•The broadcast signal is too weak.

n

 Set to the MONO mode (page 13).

The following checklist will help you remedy the problems you may encounter with your unit.
Before going through the checklist below, check the connections and operating procedures.

General

Содержание CDX-C7850





































Отзывы: