Sony CDX-C6850R, Руководство по эксплуатации

Страница: 21 / 124

21
Adjusting the frequency of
the speakers and the
subwoofer(s)
By setting the cut off level of unwanted
frequency signals, the speakers connected to
the output terminal and/or the subwoofer(s)
connected to the sub out terminal will out put
a cleare sound image.
Adjusting the frequency of the
speakers connected from the
output terminal
— High Pass Filter (HPF)
To match the characteristics of the connected
speakers from the output terminal, you can cut
out the unwanted low frequency signals
entering the speakers.
1
Press (SOURCE) to select a source (radio,
CD, or MD).
2
Press (SHIFT) , then press (3) (SET UP)
repeatedly until “HPF” appears.
3
Press (5) (
n
) or (2) (
N
) repeatedly to
select desired setting.
Each time you press
(5)
( n ) or
(2)
( N ),
the cut-off frequency in the display changes
as follows:
HPF OFF ˜ HPF 80 Hz ˜ HPF 120 Hz
4
Press (SHIFT) .
When the frequency setting is complete, the
display returns to the normal playback
mode.
Adjusting the frequency of the
subwoofer(s)
— Low Pass Filter (LPF)
To match the characteristics of the connected
subwoofer(s), you can cut out the unwanted
high and middle frequency signals entering
the subwoofer(s).
1
Press (SOURCE) to select a source (radio,
CD, or MD).
2
Press (SHIFT) , then press (3) (SET UP)
repeatedly until “LPF” appears.
3
Press (5) ( n ) or (2) ( N ) repeatedly to
select desired setting.
Each time you press
(5)
( n ) or
(2)
( N ),
the cut-off frequency in the display changes
as follows:
LPF OFF ˜ LPF 80 Hz ˜ LPF 120 Hz
4
Press (SHIFT) .
When the frequency setting is complete, the
display returns to the normal playback
mode.