24
Attenuating the sound
(With the rotary commander or the card
remote commander-optional)
Press
(ATT)
on the rotary commander or
card remote commander.
“ATT-ON” flashes momentarily.
To restore the previous volume level, press
(ATT)
again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function). (CDX-C5000RX/
C5000RV/C5000R only)
Changing the sound and
display settings
The following items can be set:
SET (setting)
•CLOCK (page 8)
•CT (Clock Time) (page 21)
•BEEP — to turn the beeps on or off.
•RM (Rotary Commander) — to change the
operative direction of the controls of the
rotary commander.
— Select “NORM” to use the rotary
commamder as the factory-set position.
— Select “REV” when you mount the rotary
commander on the right side of the
steering column.
DIS (display)
•AMBER/GREEN — to change the
illumination colour to amber or green.
(CDX-C5000R/C4900R only)
•D.INFO (Dual Information) — to display the
clock and the play mode at the same time
(ON).
•DIMMER — to dim the display (ON) or not
(OFF). (CDX-C5000RV only)
•M.DSPL (Motion Display) — to turn the
motion display on or off.
•A.SCRL (Auto Scroll) (page 10)
Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be disabled.
1
Press
(MENU)
.
2
Press either side of
(DISC/PRST)
repeatedly
until the desired item appears.
Each time you press the (–) side of
(DISC/PRST)
, the item changes as follows:
CLOCK
t
CT
t
BEEP
t
RM
t
AMBER/
GREEN
*
1
t
D.INFO
t
DIMMER
*
2
t
M.DSPL
t
A.SCRL
*
3
*
1
CDX-C5000R/C4900R only
*
2
CDX-C5000RV only
*
3
When no CD TEXT disc or MD is playing, this
item will not appear.
Note
The displayed item will differ depending on
the source.
Tip
You can easily switch among categories (“SET“,
“DIS“, “P/M“ (play mode), and “EDT“ (edit
mode)) by pressing either side of
(DISC/PRST)
for two seconds.
3
Press the (+) side of
(SEEK/AMS)
to select
the desired setting (Example: ON or OFF).
4
Press
(ENTER)
.
After the mode setting is completed, the
display returns to normal play mode.