Sony CDX-4480ESP - Am/fm Compact Disc Changer, Руководство по эксплуатации

Страница: 10 / 38

10
EN
Storing the station names
— Station Memo
You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can store up to eight characters
for a station.
Storing the station names
1
Tune in a station whose name you want
to store.
2
Press (LIST) for two seconds.
3
Enter the characters.
1
Rotate the dial clockwise to select the
desired characters.
(A
n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2
Press (4) ( n ) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (1) ( N ), the flashing cursor
moves to the left.
3
Repeat steps
1
and
2
to enter the
entire name.
4
To return to the normal radio reception,
press
(LIST) for two seconds.
Tip
To erase/correct a name, enter
“ _ ” (under-bar) for
each character.
FM1
FM1
FM1
If you cannot tune in a preset
station
Push the SEEK/AMS control up or down
momentarily to search for the station
(Automatic Tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT) , then press (3) (PLAY MODE) repeatedly
until “LOCAL” (local seek mode) is displayed. Then
press
(4) ( n ) to select “ON.”
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, push the SEEK/AMS control up or down
and hold until the desired frequency appears
(manual tuning).
If FM stereo reception is poor
— Monaural Mode
1
Press (SHIFT) , then press (3) (PLAY
MODE) repeatedly until “MONO”
appears.
2
Press (4) (
n
) repeatedly until
“MONO-ON“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
3
Press (SHIFT) .
To go back to the normal mode, select
“MONO-OFF” in step 2 above.
Changing the displayed items
Each time you press
(DSPL)
, the item changes
as follows:
z
Frequency
z
Clock
MOTION DISPLAY
*
Z
* All the items above are scrolled in the display one
by one in order.