Sony CDX-444RF - Compact Disc Changer System Скачать руководство пользователя страница 5

5

Notes on handling discs

A dirty or defective disc may cause sound drop-outs during playback. To enjoy optimum sound, handle
the disc as follows.

• Handle the disc by its edge, and do not touch the unlabled surface. (fig. 

A

)

• Do not stick paper or tape on the disc. (fig. 

B

)

• Keep your discs in their cases or disc magazines when not in use.

Do not expose the discs to direct sunlight or heat sources such as hot air-ducts. Do not leave the
discs in a car parked in direct sunlight where there can be a considerable rise in temperature
inside the car. (fig. 

C

)

• Before playing, clean the discs with an optional cleaning cloth. Wipe each disc in the direction of

the arrows. (fig. 

D

)

Do not use solvents such as benzine, thinner, commercially available cleaner, or antistatic spray intended
for analog discs.

• Discs with special shapes (heart-shaped discs, octagonal discs etc.) cannot be played on this unit.

Attempting to do so may damage the unit. Do not use such discs.

Notes on discs

If you use the discs explained below, the sticky residue can cause the disc to stop spinning and may cause
malfunction or ruin your discs.
Do not use second-hand or rental CDs that have a sticky r
esidue on the surface (for example, from peeled-
off stickers or from ink, or glue leaking from under the stickers).

• There are paste residue. Ink is sticky. (fig. 

E

)

Do not use rental CDs with old labels that are beginning to peel off.

• Stickers that are beginning to peel away, leaving a sticky residue. (fig. 

F

)

Do not use your discs with labels or stickers attached.

• Labels are attached. (fig. 

G

)

Notes on CD-R discs

• You can play CD-Rs (recordable CDs) designed for audio use on this unit (fig. 

H

).

• Some CD-Rs (depending on the equipment used for its recording or the condition of the disc) may

not play on this unit.

• You cannot play a CD-R that is not finalized

*

.

*

A process necessary for a recorded CD-R disc to be played on the audio CD player.

Remarques sur la manipulation des disques

Un disque sale ou défectueux peut provoquer des pertes de son à la lecture. Manipuler le disque comme
suit pour obtenir un son optimal.

• Saisissez les disques par les bords et n’en touchez jamais la surface. (fig. 

A

)

• Ne collez pas de papier ni de bande adhésive sur le disque. (fig. 

B

)

• Conservez vos disques dans leurs boîtiers ou des pochettes de rangement lorsqu’ils ne sont pas

utilisés.
N’exposez pas les disques au rayonnement direct du soleil ni à des sources de chaleur comme des
conduits d’air chaud. Ne laissez pas les disques dans une voiture parquée en plein soleil où la
température intérieure de l’habitable risque d’augmenter considérablement. (fig. 

C

)

• Avant la lecture, essuyer les disques avec un chiffon de nettoyage optionnel. Essuyer chaque

disque dans le sens des flèches. (fig. 

D

)

Ne pas utiliser de solvants tels que de la benzine, du diluant, des produits de nettoyage vendus dans le
commerce ou des vaporisateurs anti-statiques destinés aux disques analogiques.

• Il n’est pas possible d’utiliser les disques de formes spéciales (en forme de cœur ou octogonaux,

etc.) avec cet appareil. Vous risquez d’endommager l’appareil. N’essayez jamais de lire ces disques.

Remarques sur les disques

Si vous utilisez les disques décrits ci-dessous, le résidu adhésif risque de provoquer l’arrêt de la rotation
du disque et d’entraîner un dysfonctionnement ou d’endommager vos disques.
N’utilisez pas de CD de seconde main ou de location qui présentent des résidus adhésifs à la surface (par
exemple d’étiquettes décollées ou d’encre, de colle dépassant de l’étiquette).

• Résidus de colle. L’encre colle. (fig. 

E

)

N’utilisez pas de CD de location avec d’anciennes étiquettes qui commencent à se décoller.

• Les étiquettes qui commencent à se décoller laissent des résidus adhésifs. (fig. 

F

)

N’utilisez pas vos disques avec des étiquettes ou des autocollants apposés dessus.

• Les étiquettes sont fixées. (fig. 

G

)

Remarques sur les disques CD-R

• Vous pouvez écouter  avec cet appareil des CD-R (CD enregistrables) conçus pour une utilisation

audio. (fig. 

H

)

• Certains CD-R (en fonction des conditions de l’équipement d’enregistrement ou du disque)

risquent de ne pas être lus avec cet appareil.

• Vous ne pouvez pas lire de disques CD-R non finalisés

*

.

*

Un processus nécessaire à la lecture des disques CD-R enregistrés sur le  lecteur de CD audio.

Remarques sur le chargeur de disques

•Ne pas laisser le chargeur de disques dans un endroit très chaud ou très humide comme sur le tableau

de bord ou sur la plage arrière d’une voiture où il serait en plein soleil.

•Ne placez pas plus d’un disque à la fois par plateau, faute de quoi vous risquez d’endommager le

changeur de CD et les disques.

•Ne pas laisser tomber le chargeur de disques ni le cogner.

Notes on the disc magazine

•Do not leave the disc magazine in locations with high temperature and high humidity,  such as on a car

dashboard or in the rear window where the disc magazine will be subject to direct sunlight.

•Do not place more than one disc at a time onto a tray,  otherwise the CD changer and the discs may be

damaged.

•Do not drop the disc magazine or subject it to a violent shock.

2

1

4

3

Use the supplied disc magazine or the disc magazine XA-250. The
disc magazine XA-10B cannot be used with this unit. If you use any
other disc magazine, it may cause a malfunction.

Notes
• To listen to an 8 cm (3 in.) CD, use the optional Sony CD adaptor

CSA-8. Be sure to always use the specified adaptor, as failing to do so
may cause a malfunction of the unit. If you use any other adaptor, the
unit may not operate properly. When using the Sony CD adaptor,
make sure that the three catches on the adaptor are firmly latched
onto the 8 cm (3 in.) CD.

• Do not insert the Sony CD adaptor CSA-8 in the disc magazine without

a disc, malfunction may result.

Utilisez le magasin à disques fourni ou un magasin à disques XA-250.
Vous ne pouvez pas utiliser de magasin à disques XA-10B avec cet
appareil. L’utilisation d’un autre type de magasin à disques risque de
provoquer un dysfonctionnement.

Remarques
• Pour écouter un CD de 8 cm (3 po.) CD, utilisez l’adaptateur CD Sony

en option CSA-8. Veillez à toujours utiliser l’adaptateur spécifié, faute
de quoi vous risquez de provoquer un dysfonctionnement  de
l’appareil. Si vous utilisez un autre adaptateur, l’appareil risque de ne
pas fonctionner correctement. Lorsque vous employez l’adaptateur CD
Sony, assurez-vous que les trois encoches de l’adaptateur soient
fermement engagées sur le CD de 8 cm (3 po.).

• N’introduisez pas l’adaptateur CD Sony CSA-8 dans le chargeur sans

disque, car il pourrait en résulter un dysfonctionnement.

Use the unit with the door closed completely

Otherwise, foreign matter may enter the unit and contaminate the lenses
inside the CD changer.

Utilisez cet appareil avec la fenêtre complètement fermée

Sinon, des corps étrangers risquent de pénétrer à l’intérieur de l’appareil et
d’encrasser les lentilles à l’intérieur du changeur de CD.

To remove
Retrait

If the disc magazine does not lock properly

Take out the disc magazine, press 

Z

, and re-insert it.

Si vous ne pouvez pas fermer le chargeur de disques

Retirez le chargeur, appuyez sur 

Z

 et réintroduisez-le.

Z

 (EJECT)

Inserting a disc

Insertion d’un disque

x

When the tray comes out

Normally,  the trays will not come out of
the disc magazine. However, if they are
pulled out of the disc magazine, it is
easy to re-insert them.

With the cut-away portion of the
tray facing you, insert the right
corner of the tray in the slot, then
push in the left corner until it clicks.

Note
Do not insert the tray upside down or in
the wrong direction.

Si un plateau s’enlève

En principe, les plateaux ne s’enlèvent
pas du magasin. S’ils s’enlèvent du
magasin, il est cependant facile de les y
réintroduire.

L’encoche du plateau étant face à
vous, introduisez l’angle droit du
plateau dans la fente et poussez
ensuite sur l’angle gauche jusqu’à ce
qu’il s’encliquette.

Remarque
N’introduisez pas le plateau à l’envers ni
dans le mauvais sens.

Slide open
Coulissez pour ouvrir

Labeled surface up
Face imprimée vers le haut

10 discs, one in each tray
10 disques, un par plateau

Disc magazine
Chargeur de disques

Tab
Onglet

c

This way
Oui

Not this way
Non

Not this way
Non

This way
Oui

A

B

C

D

E

F

G

With the arrow side facing up
Avec le côté portant la flèche orienté
vers le haut

Push to unlock the door
Poussez pour déverrouiller la porte

Moisture condensation

On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit, and the unit
will not operate properly.  In such a case, 

remove the disc magazine and wait for about an hour until

the moisture has evaporated.

If you have any questions or problems concerning your unit that are not covered in this manual, please
consult your nearest Sony dealer.

Remarque sur la condensation d’humidité

Les jours de pluie et dans les régions très humides, il se peut que de l’humidité se condense sur les
objectifs à l’intérieur de l’appareil, qui risque alors de ne pas fonctionner correctement. En pareil cas,

retirez le chargeur de disques et attendez environ une heure que l’humidité se soit complètement
évaporée.

Si vous avez des questions ou des problèmes au sujet de votre appareil qui ne sont pas abordés dans le
présent mode d’emploi, consultez votre revendeur Sony.

H

Look for this mark to distinguish CD-Rs
for audio use.
Ce symbole permet de distinguer les
CD-R conçus pour une utilisation audio.

This mark denotes that a disc is not for
audio use.
Ce symbole indique qu’un disque n’est
pas conçu pour une utilisation audio.

Note
To prevent injury, do not insert your hand in the CD changer.

Remarque
Pour éviter toute blessure, ne pas introduire la main dans le
changeur de CD.

www. xiaoyu163. com

QQ 376315150

9

9

2

8

9

4

2

9

8

TEL 13942296513

9

9

2

8

9

4

2

9

8

0

5

1

5

1

3

6

7

3

Q

Q

TEL  13942296513  QQ  376315150  892498299 

TEL  13942296513  QQ  376315150  892498299 

http://www.xiaoyu163.com

http://www.xiaoyu163.com

Содержание CDX-444RF - Compact Disc Changer System

























































Отзывы: