■
INTERFACE connector
1
Firmly insert one end of the interface cable into the INTERFACE
CONNECTOR.
2
Attach the other end of the cable to the host adapter.
Installing the Drive in Your Computer
17
■
F. GND tab
Connect the F. GND tab to one of the host computer’s ground cables
unless the drive’s frame is in direct contact with the computer’s chassis
(a situation not likely under normal circumstances).
The frame ground cable recommended is the one using an AMP 1-480435-0
housing and 170203-2 or 60711-1 contact.
■
AUDIO OUT connector
The audio output cables recommended are those using a Molex 08-50-0113
or 08-50-4114 contacts and a 22-01-3047 housing. The pin assignment is as
follows:
16
Installing the Drive in Your Computer
F. GND tab
Frame ground cable
INTERFACE
CONNECTOR
Interface cable
Pin 1
Right signal
GND
GND
Left signal
Host adapter
Interface cable
