– 6 –
SECTION 2
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
2-1. FRONT PANEL
• When removing the front panel assembly on electric power failure,
first open the loading block by turning cam with a screwdriver as
shown in the figure, next pull out the loading block with hand, and
remove the loading panel as shown in the figure, then remove the
front panel assembly.
3
Remove loading panel in the arrow direction.
2-2. BASE UNIT BLOCK
1
Turn the cam to direction of arrow (Counter clockwise) by
minus screw driver.
2
Take off the disc table.
3
Remove the yoke bracket.
4
Remove the MD (BU-5BD20) to the direction of arrow.
1
Turn in the direction
of the arrow.
2
Pull out disc table.
bottom of chassis
1
cam
2
disc table
4
BU-5BD20
3
yoke bracket
