![background image](http://html.mh-extra.com/html/sony/cdp-x3000/cdp-x3000_service-manual_420238004.webp)
– 4 –
1-2-2. key check
All buttons are assigned with numbers respectively
If a button is pressed, the number is counted up and the button
number is displayed.
1-2-3. Remocon check
Press
·
button on the Remocon, and “
·
”on FL tube turns
on. If any other buttons are pressed, all tubes will turn off.
1-3. ADJ MODE
With CN105
3
pin connected to
1
pin on the Servo Board, turn
on the POWER switch, and the ADJ mode is activated where the
following operation is executed.
• GFS, even if low continuously during playing, will cause noth-
ing.
• High speed servo is disabled during an access.
• Gain of focus servo and spindle servo is not lowered.
• Manual operation and measurement for servo system are en-
abled. (For detailed operation method, see the button function
table in ADJ mode.)
1-4. CLV-S MODE
Connect TP1(ADJ) to the GND after turning on the POWER
switch, and the spindle servo becomes CLV-S mode during play-
ing.
Button function table in ADJ mode
With the TIME key, the jitter value display mode is activated
after all music remaining mode.
The number buttons have the functions as listed below.
Functions of number buttons
(on Remocon attached)
Button number display
Button name Button number display
+
88
=
01
)
02
0
03
PLAY
·
Segment ON 1
P
Segment ON 2
p
All ON
[DISPLAY BOARD] – Conductor Side –
[SERVO BOARD] – Conductor Side –
Buttons
Functions
1
Increase focus bias by 8 steps
2
Adjust focus bias to the center
3
Turn off tracking servo and sled servo
4
Initialize auto gain
5
Turn off focus servo
6
Decrease focus bias by 8 steps
7
Readjust focus bias there
8
Turn on tracking servo and sled servo
10
Return auto focus bias to start point
IC105
TP3
RV101
CN108
1
2
IC107
IC106 (TEI)
(TE)
(VC)
CN107
CN105
321CN106
(ADJ)
(AFJ)
(GND)
3
IC801
GND
7
1
6
IN/OUT SW
CN805
Содержание CDP-X3000
